R1.1 Measuring enthalpy changes

R1.1 Measuring enthalpy changes

IB Chemistry HL: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • The system is the reacting chemicals; the surroundings are everything else.
  • Heat is energy transferred because of a temperature difference; temperature is average kinetic energy.
  • Exothermic: temperature rises, ΔH negative. Endothermic: temperature falls, ΔH positive.
  • Standard conditions: 100 kPa, solutions at 1 mol dm⁻³, usually 298 K.
  • Q=mcΔTQ = mc\Delta T then ΔH=−Q÷n\Delta H = -Q ÷ n, in kJ mol⁻¹ with its sign.

System, heat and temperature

The system is the reacting chemicals; heat is energy transferred, while temperature measures average particle kinetic energy.

In energetics the system is the reacting chemicals and the surroundings are everything else (solvent, container, air).

Total energy is conserved: energy lost by the system is gained by the surroundings, and vice versa.

A large bath at 40 °C holds more thermal energy than a cup at 60 °C, but its temperature is lower.

  1. 1

    System

    the reacting chemicals

  2. 2

    Energy transferred

    lost by the system = gained by the surroundings

  3. 3

    Surroundings

    solvent, container and air

Energy is conserved between system and surroundings

Heat

Measures:
Energy transferred because of a temperature difference
Units:
J

Temperature

Measures:
Average kinetic energy of the particles
Units:
°C or K

Which has the greater temperature: a bath of water at 40 °C or a cup of water at 60 °C?

Exothermic and endothermic

Exothermic reactions release energy to the surroundings and have negative ΔH; endothermic reactions absorb it and have positive ΔH.

In an exothermic reaction energy passes from the system to the surroundings, so the surroundings get warmer.

In an endothermic reaction energy passes from the surroundings to the system, so the surroundings get colder.

The enthalpy change, ΔH, is the heat transferred at constant pressure.

1234567891024681012reaction progressenthalpyexothermicendothermic
Enthalpy profiles (illustrative): exothermic products end lower than reactants (ΔH < 0); endothermic products end higher (ΔH > 0)

Exothermic

Energy flow:
System to surroundings
Surroundings:
Temperature rises
Sign of ΔH:
Negative
Examples:
Combustion, neutralisation, iron hand-warmer

Endothermic

Energy flow:
Surroundings to system
Surroundings:
Temperature falls
Sign of ΔH:
Positive
Examples:
Dissolving ammonium nitrate, thermal decomposition of calcium carbonate, photosynthesis

A reaction makes the beaker feel cold. What is the sign of ΔH?

Stability and energy profiles

If products are more stable than reactants, energy is released; if less stable, energy must be absorbed.

Products with lower enthalpy are more stable, and the difference is released: exothermic. Products with higher enthalpy are less stable, so energy must be absorbed: endothermic.

An energy profile plots enthalpy against progress of reaction.

  • Exothermic: products below reactants, ΔH arrow down.
  • Endothermic: products above reactants, ΔH arrow up.

The hump above the reactants is the activation energy, Ea. In an endothermic profile Ea must be larger than ΔH.

123456789102468xyReactantsProductsTop of humpEnthalpy
Energy profile for an exothermic reaction: the products are lower than the reactants, and the hump is the activation energy.

In an exothermic reaction, how do the enthalpies of products and reactants compare?

Standard enthalpy change

ΔH⦵ is the heat transferred at constant pressure under standard conditions, per mole of reaction as written.

The standard enthalpy change, ΔH⦵, refers to standard conditions:

  • 100 kPa pressure
  • substances in their standard states (their normal physical state under these conditions)
  • solutions at 1 mol dm⁻³

A temperature is usually quoted as 298 K. ΔH is given in kJ mol⁻¹, always with its sign.

  1. 1

    100 kPa

    pressure

  2. 2

    Standard states

    each substance in its normal state at these conditions

  3. 3

    1 mol dm⁻³

    for solutions

  4. 4

    298 K

    the temperature usually quoted

Standard conditions for a standard enthalpy change
  • Pressure100 kPa
  • Solutions1 mol dm⁻³
  • Temperature, usually298 K

What pressure is used for standard conditions?

Calculating ΔH from temperature

Find Q from mass, specific heat capacity and temperature change, then divide by moles and attach the sign.

  1. Q = mcΔT: m is the mass of the substance heated (usually the water or solution, taking 1.00 g cm⁻³), c is the specific heat capacity (4.18 J g⁻¹ K⁻¹ for water), ΔT is the temperature change (same in °C and K).
  2. Find the amount (mol) of the limiting reactant, or of fuel burned.
  3. ΔH = −Q ÷ n, converting J to kJ. Negative if the temperature rose.
  1. 1

    Q = mcΔT

    m of solution, c = 4.18 J g⁻¹ K⁻¹, ΔT in K

  2. 2

    Find the moles

    of the limiting reactant or fuel burned

  3. 3

    ΔH = −Q ÷ n

    convert J to kJ

  4. 4

    Attach the sign

    negative if the temperature rose

From a temperature rise to ΔH
  • Heat transferredQ=mcΔTQ = mc\Delta T
  • Enthalpy changeΔH=−Qn\Delta H = -\dfrac{Q}{n}

Worked example

50.0 cm³ of 1.00 mol dm⁻³ HCl\ce{HCl} is mixed with 50.0 cm³ of 1.00 mol dm⁻³ NaOH\ce{NaOH}. The temperature rises by 6.6 K. Find ΔH.

Which quantity is m in Q=mcΔTQ = mc\Delta T for a reaction in solution?

Why experimental values differ

Heat loss to the surroundings and apparatus makes calorimetry values less exothermic than accepted values.

Calorimetry values are usually less exothermic than data booklet values because of heat loss to the surroundings and heat absorbed by the container and thermometer.

For fuels, incomplete combustion (soot) and evaporation from the wick also lower the result. Calculations assume the solution has the density and specific heat capacity of water.

Report percentage error = |experimental − accepted| ÷ |accepted| × 100.

1234567891018202224262830time (min)temperature (°C)measuredno heat loss
Temperature against time (illustrative values): heat loss to the surroundings means the measured rise is smaller than the rise with no heat loss

Sources of error

  • Heat lost to surroundings
  • Heat absorbed by container and thermometer
  • Incomplete combustion of fuel
  • Fuel evaporating from the wick

Improvements

  • Insulate the cup
  • Use a lid
  • Stir
  • Shield the flame

Why is a calorimetry value for a neutralisation usually less exothermic than the accepted value?

Try an exam question

25.0 cm³ of 2.00 mol dm⁻³ HCl\ce{HCl} is mixed with 25.0 cm³ of 2.00 mol dm⁻³ NaOH\ce{NaOH} and the temperature rises by 13.0 K. Calculate ΔH, in kJ mol⁻¹. Use c = 4.18 J g⁻¹ K⁻¹ and 1.00 g cm⁻³.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

Which statement describes the dissolving of ammonium nitrate in the cold pack?

1 mark, marked against the mark scheme

Revision notes