R2.1 How much? The amount of chemical change

R2.1 How much? The amount of chemical change Test

IB Chemistry SL: Subtopic test

Studying this course? Keep your progress in one place.

Two ways to do this test

Question by question

One question at a time. Each answer is marked the moment you hand it in, so you learn as you go. Drago helps if you get stuck. All 10 questions, or just 5.

Exam mode

The whole paper in one go, timed like the real exam. Nothing is marked until you hand it in, then you get every mark explained.

10 questions, 27 marks

IB Chemistry SL

R2.1 How much? The amount of chemical change

Total 27 marks

Name

Class

Date

  1. 1
    A car airbag contains sodium azide, NaN₃, which decomposes rapidly when ignited: 2NaN₃(s) → 2Na(s) + 3N₂(g). The reactive sodium formed is removed by potassium nitrate: 10Na(s) + 2KNO₃(s) → K₂O(s) + 5Na₂O(s) + N₂(g). Relative atomic masses: Na 22.99, N 14.01. Molar volume of an ideal gas at STP = 22.7 dm³ mol⁻¹.
    (a)
    What volume of nitrogen, measured at STP, is produced by the decomposition of 65.0 g of sodium azide?
    [1 mark]
    • A22.7 dm³
    • B15.1 dm³
    • C68.1 dm³
    • D34.0 dm³
    Show the mark scheme

    Mark scheme

    Answer: D
    (b)
    What amount of potassium nitrate is needed to react completely with 1.00 mol of sodium?
    [1 mark]
    • A0.100 mol
    • B2.00 mol
    • C0.200 mol
    • D5.00 mol
    Show the mark scheme

    Mark scheme

    Answer: C
    (c)
    Calculate the mass of sodium azide needed to produce 60.0 dm³ of nitrogen at STP from the decomposition alone. Give your answer to three significant figures.
    [2 marks]
    Show the mark scheme

    Mark scheme

    [1] n(N₂) = 60.0 ÷ 22.7 = 2.64 mol and n(NaN₃) = 2.64 × 2/3 = 1.76 mol
    Accept: ECF

    [1] mass = 1.76 × 65.02 = 115 g

    Accept: 114.6 g if rounded to three significant figures as 115; ECF

    Total for question 1: 4 marks

  2. 2
    A student dissolves 3.20 g of hydrated sodium carbonate, Na₂CO₃·xH₂O, in water and makes the solution up to 250.0 cm³. A 25.0 cm³ portion of this solution requires 22.40 cm³ of 0.100 mol dm⁻³ hydrochloric acid for complete reaction: Na₂CO₃(aq) + 2HCl(aq) → 2NaCl(aq) + H₂O(l) + CO₂(g). Molar masses, in g mol⁻¹: Na₂CO₃ 105.99, H₂O 18.02.
    (a)
    What amount of sodium carbonate is present in the 25.0 cm³ portion?
    [1 mark]
    • A2.24 × 10⁻³ mol
    • B1.12 × 10⁻³ mol
    • C4.48 × 10⁻³ mol
    • D1.12 mol
    Show the mark scheme

    Mark scheme

    Answer: B
    (b)
    What is the concentration of sodium carbonate in the solution?
    [1 mark]
    • A0.0448 mol dm⁻³
    • B0.0896 mol dm⁻³
    • C0.00448 mol dm⁻³
    • D44.8 mol dm⁻³
    Show the mark scheme

    Mark scheme

    Answer: A
    (c)
    Determine the value of x in Na₂CO₃·xH₂O.
    [2 marks]
    Show the mark scheme

    Mark scheme

    [1] n(Na₂CO₃) in 250.0 cm³ = 0.0112 mol, so M(hydrate) = 3.20 ÷ 0.0112 = 286 g mol⁻¹
    [1] x = (286 − 105.99) ÷ 18.02 = 10

    Accept: 9.97 rounded to 10; ECF

    Total for question 2: 4 marks

  3. 3
    Aspirin is made by reacting salicylic acid with ethanoic anhydride: C₇H₆O₃ + C₄H₆O₃ → C₉H₈O₄ + CH₃COOH. A student mixes 2.00 g of salicylic acid with 5.00 cm³ of ethanoic anhydride (density 1.08 g cm⁻³), heats the mixture, then recrystallises the product from hot water, obtaining 1.89 g of dry aspirin. Molar masses, in g mol⁻¹: salicylic acid 138.13; ethanoic anhydride 102.10; aspirin 180.17; ethanoic acid 60.06.
    (a)
    Identify the limiting reactant, showing your working.
    [3 marks]
    Show the mark scheme

    Mark scheme

    [1] n(salicylic acid) = 2.00 ÷ 138.13 = 0.0145 mol
    [1] n(ethanoic anhydride) = 5.00 × 1.08 ÷ 102.10 = 0.0529 mol

    [1] 1 : 1 ratio, so salicylic acid is the limiting reactant

    Accept: ECF
    (b)
    Calculate the percentage yield of aspirin and evaluate the student's claim that using even more ethanoic anhydride would have raised the yield.
    [4 marks]
    Show the mark scheme

    Mark scheme

    [1] theoretical yield = 0.0145 × 180.17 = 2.61 g
    [1] percentage yield = 1.89 ÷ 2.61 × 100 = 72.4%

    Accept: 72.3–72.5%; ECF

    [1] the anhydride is already in excess, so the theoretical yield is fixed by the salicylic acid and more anhydride cannot raise it; the claim is not justified

    [1] yield is below 100% because of losses in recrystallisation, filtration or transfer, or incomplete reaction

    Accept: side reactions

    Total for question 3: 7 marks

  4. 4
    Ethanol can be manufactured by two routes. Route A, hydration: ethene from crude oil reacts with steam, C₂H₄(g) + H₂O(g) → C₂H₅OH(g), at 300 °C and 6 MPa with a phosphoric acid catalyst; only about 5% of the ethene is converted on each pass through the reactor, but unreacted ethene is recycled so that overall conversion reaches 95%. Route B, fermentation: yeast converts glucose, C₆H₁₂O₆, from sugar cane into ethanol and carbon dioxide at 35 °C, with a percentage yield of 90.0%. Molar masses, in g mol⁻¹: C₂H₄ 28.06; H₂O 18.02; C₂H₅OH 46.08; C₆H₁₂O₆ 180.16; CO₂ 44.01.
    (a)
    Deduce the equation for fermentation, calculate the atom economy of each route, and explain why a process with a high atom economy can still have a low percentage yield.
    [6 marks]
    Show the mark scheme

    Mark scheme

    [1] C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂
    [1] route A atom economy = 100%, because all reactant atoms end up in the product

    [1] route B atom economy = 2 × 46.08 ÷ 180.16 × 100 = 51.2%

    Accept: ECF from the equation

    [1] atom economy depends only on the stoichiometry of the balanced equation

    [1] percentage yield depends on the amount actually obtained, which is reduced by incomplete reaction, equilibrium, side reactions and losses

    [1] route A has 100% atom economy but only about 5% conversion per pass, so recycling is needed
    (b)
    A plant must produce 1.00 tonne of ethanol. Determine the mass of glucose needed for Route B, and evaluate which route is more sustainable.
    [6 marks]
    Show the mark scheme

    Mark scheme

    [1] n(ethanol) = 1.00 × 10⁶ ÷ 46.08 = 2.17 × 10⁴ mol
    [1] n(glucose) = 1.09 × 10⁴ mol, mass = 1.95 t at 100% yield

    Accept: 1.95–1.96 t

    [1] at 90.0% yield: 1.95 ÷ 0.900 = 2.17 t

    Accept: ECF

    [1] route B has a lower atom economy and produces about 0.955 t of CO₂ per tonne of ethanol

    [1] route B: renewable feedstock, CO₂ recently fixed by photosynthesis, mild conditions so low energy use

    [1] route A: high atom economy but non-renewable feedstock and energy-intensive conditions; a justified conclusion

    Accept: any justified conclusion, e.g. B more sustainable if grown without deforestation

    Total for question 4: 12 marks

End of questions

Subtopic tests