IB Chemistry SL
S1.1 Introduction to the particulate nature of matter
Total 27 marks
Name
Class
Date
- 1A technician labels three unknown samples X, Y and Z. Sample X is a shiny grey solid that cannot be decomposed by heating or by electrolysis; when it is heated in air it forms a white powder whose mass is greater than the mass of X used. Sample Y is a colourless liquid that boils sharply at a single temperature; electrolysis splits it into two gases that are always produced in a volume ratio of 2 : 1. Sample Z is a yellow metallic solid made from copper and zinc; samples bought from different suppliers contain between 60 % and 70 % copper by mass, and Z melts gradually over a range of about 30 °C.(a)Which row correctly classifies the three samples?[1 mark]
- AX element, Y compound, Z mixture
- BX compound, Y compound, Z mixture
- CX element, Y mixture, Z compound
- DX mixture, Y element, Z compound
Show the mark scheme
Mark scheme
Answer: A(b)Which observation about Z is the best evidence that it is a mixture rather than a compound?[1 mark]- AIt conducts electricity
- BIts percentage of copper varies from one supplier to another
- CIt is a solid at room temperature
- DIt contains two different elements
Show the mark scheme
Mark scheme
Answer: B(c)A student argues that X must be a compound because its mass changes when it is heated in air. Explain why this reasoning is incorrect.[2 marks]Show the mark scheme
Mark scheme
[1] X reacts with oxygen from the air to form a new compound (an oxide), so the gain in mass is the added oxygen
Accept: X is oxidised
[1] this is a combination, not a decomposition: nothing simpler is obtained from X, which is consistent with X being an element
Do not accept: X is a compound because it reactsTotal for question 1: 4 marks
- 2A chemist keeps two sealed containers of gas. Container 1 holds helium at 27 °C. Container 2 holds argon at 327 °C. Both gases behave as collections of widely spaced particles in rapid random motion.(a)What is the temperature of the argon in kelvin?[1 mark]
- A54 K
- B327 K
- C600 K
- D−54 K
Show the mark scheme
Mark scheme
Answer: C(b)What is the ratio of the average kinetic energy of the argon particles to that of the helium particles?[1 mark]- A0.5
- B1
- C12.1
- D2
Show the mark scheme
Mark scheme
Answer: D(c)A student predicts that heating the helium from 27 °C to 54 °C will double the average kinetic energy of its particles. Evaluate this prediction.[2 marks]Show the mark scheme
Mark scheme
[1] average kinetic energy is proportional to temperature in kelvin, not °C, so the prediction is incorrect
[1] 300 K to 327 K, so kinetic energy increases by a factor of 327 / 300 = 1.09 (about 9 %)
Accept: 1.1Total for question 2: 4 marks
- 3A student heats a 20 g sample of a pure organic solid at a constant rate and records its temperature every minute. The temperature rises from −20.0 °C to 5.5 °C during the first 2 minutes and then stays at 5.5 °C until 9 minutes. It then rises steadily to 80.1 °C at 17 minutes, and stays at 80.1 °C from 17 minutes until the last of the sample has turned to vapour at 40 minutes.(a)Deduce the melting point and boiling point of the substance in kelvin, and state the physical state or states present between 2 and 9 minutes.[3 marks]
Show the mark scheme
Mark scheme
[1] melting point = 5.5 + 273 = 278.5 K
Accept: 278.65 K; 279 K
[1] boiling point = 80.1 + 273 = 353.1 K
Accept: 353.25 K; 353 K
[1] solid and liquid are both present between 2 and 9 minutes (the solid is melting)
Do not accept: solid only; liquid only(b)Explain, using the kinetic molecular theory, why the temperature stays constant during both changes of state, and why the second constant-temperature stage lasts more than three times longer than the first.[4 marks]Show the mark scheme
Mark scheme
[1] the energy supplied is used to overcome the attractive forces between particles (increasing potential energy)
[1] average kinetic energy does not change, so the temperature stays constant
[1] melting only partly overcomes the attractions: the particles stay close together but can move past one another
[1] boiling separates the particles completely, which needs much more energy, so at a constant heating rate it takes longer (23 minutes against 7 minutes)
Accept: vaporisation needs more energy than meltingTotal for question 3: 7 marks
- 4A food company makes instant coffee by freeze-drying. Brewed coffee, a solution of many flavour and aroma compounds in water, is frozen at −40 °C. The pressure is then lowered so that the ice turns directly into water vapour, leaving dry coffee solids behind. A rival company instead makes its coffee by boiling the brewed coffee until all the water has evaporated.(a)Describe and explain, using the kinetic molecular theory, the changes in arrangement, movement and energy of the water particles during freezing and then during sublimation. Include an equation with state symbols for the sublimation, and explain why the coffee solids can be recovered in this way.[6 marks]
Show the mark scheme
Mark scheme
[1] freezing: particles lose kinetic energy and are held in fixed positions in a regular arrangement, vibrating only
[1] freezing releases energy (exothermic) as attractive forces between particles form
[1] sublimation: particles absorb energy and overcome the attractive forces completely, going straight from solid to gas
[1] in the gas the particles are far apart and move rapidly and randomly
[1] H₂O(s) → H₂O(g)
Accept: state symbols must be shown
[1] coffee is a mixture: the water is not chemically bonded to the coffee compounds, so it can be removed by a physical method, leaving the solids(b)Evaluate freeze-drying compared with boiling off the water as a way of producing instant coffee that keeps the flavour of the brewed coffee.[6 marks]Show the mark scheme
Mark scheme
[1] both methods are physical separations of a mixture because the water is not chemically bonded to the coffee compounds
[1] boiling at about 373 K compared with 233 K gives particles a much higher average kinetic energy
[1] volatile aroma compounds with low boiling points escape with the steam, so flavour is lost
[1] the high temperature may decompose flavour compounds, forming new substances
[1] freeze-drying keeps kinetic energy low, so fewer volatile molecules escape and chemical change is less likely, keeping more flavour
[1] freeze-drying costs more (refrigeration, low pressure, slower), so the conclusion is that it is better for flavour but more expensive
Accept: boiling is cheaperTotal for question 4: 12 marks
End of questions