B.1 Thermal energy transfers

B.1 Thermal energy transfers

IB Physics SL: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Temperature is a measure of the average random kinetic energy of molecules: Eˉk=32kBT\bar{E}_k = \frac{3}{2}k_BT, with TT in kelvin.
  • Internal energy = total random kinetic energy + total intermolecular potential energy.
  • During a phase change the temperature is constant and the energy goes into potential energy.
  • Q=mcΔTQ = mc\Delta T and Q=mLQ = mL.
  • Conduction rate =kAΔT/Δx= kA\Delta T/\Delta x; convection depends on density differences.
  • L=σAT4L = \sigma AT^4, b=L/4πd2b = L/4\pi d^2 and λmaxT=2.9×10−3\lambda_{max}T = 2.9\times10^{-3} m K.

Molecular model

Temperature measures the average random kinetic energy of the molecules, and the state depends on how they are arranged.

Solids have molecules in fixed positions, vibrating. Liquids are close but slide past each other. Gases are far apart and move randomly at high speed. Temperature differences use 1 K = 1 °C, but ratios need kelvin: 40 °C is not 'twice as hot' as 20 °C.

Solid

Liquid

Gas

Particle arrangement in a solid, a liquid and a gas

Solid

Arrangement:
Fixed positions
Motion:
Vibrate about fixed positions
Intermolecular forces:
Strong
Density:
High

Liquid

Arrangement:
Close, can move past each other
Motion:
Slide past each other
Intermolecular forces:
Moderate
Density:
High

Gas

Arrangement:
Far apart
Motion:
Random, high speed
Intermolecular forces:
Only in collisions
Density:
Low

Worked example

Find the mean random kinetic energy of a gas molecule at 27 °C. (kB=1.38×10−23k_B = 1.38 \times 10^{-23} J K−1^{-1})

The temperature of a gas rises from 20 °C to 40 °C. Does the average kinetic energy of its molecules double?

Internal energy and phase changes

Warming raises kinetic energy and temperature; a phase change raises potential energy at constant temperature.

Internal energy is the total random kinetic energy of the molecules plus the total intermolecular potential energy. While a substance warms, the kinetic energy rises. During melting or boiling the temperature is constant, so the average kinetic energy is constant and the supplied energy separates the molecules, raising their potential energy.

  1. 1

    Ice warms

    Temperature rises: kinetic energy increases

  2. 2

    Melting

    Constant temperature: potential energy increases

  3. 3

    Water warms

    Temperature rises: kinetic energy increases

  4. 4

    Boiling

    Constant temperature: potential energy increases

Heating ice until it boils

Warming

Temperature:
Rises
Average kinetic energy:
Increases
Intermolecular potential energy:
Roughly constant

Phase change

Temperature:
Constant
Average kinetic energy:
Constant
Intermolecular potential energy:
Increases

Energy is supplied to boiling water at 100 °C. What happens to the energy?

Heat capacity and latent heat

Warming needs mcΔT; a phase change at constant temperature needs mL.

Specific heat capacity cc is the energy per kilogram per kelvin of temperature rise. Specific latent heat LL is the energy per kilogram to change phase with no temperature change. LL for vaporisation is much larger than for fusion: separating molecules completely takes far more energy than loosening them.

0500100015002000Fusion (melting)Vaporization (boiling)phase changeL / kJ kg⁻¹
Specific latent heat of water: boiling needs far more energy than melting
  • WarmingQ=mcΔTQ = mc\Delta T
  • Phase changeQ=mLQ = mL

Worked example

How much energy is needed to melt 0.50 kg of ice at 0 °C and warm the water to 20 °C? (Lf=3.34×105L_f = 3.34 \times 10^5 J kg−1^{-1}, c=4180c = 4180 J kg−1^{-1} K−1^{-1})

Why is the latent heat of vaporization much larger than the latent heat of fusion?

Conduction and convection

Conduction passes energy between neighbouring particles; convection moves energy with a flowing fluid.

In conduction, vibrating particles pass energy on (free electrons help in metals). The rate depends on the material's thermal conductivity kk, the area, the temperature difference and the thickness. In convection warmer, less dense fluid rises and cooler, denser fluid sinks. Still air has a very low kk, which is why trapped air insulates.

  1. 1

    Fluid heated

    Warmer fluid at the bottom expands

  2. 2

    Rises

    It is less dense, so it floats upwards

  3. 3

    Cools

    Energy is lost at the top

  4. 4

    Sinks

    Cooler, denser fluid falls back down

Then back to step 1

A convection current
  • Rate of conductionΔQΔt=kAΔTΔx\dfrac{\Delta Q}{\Delta t} = \dfrac{kA\Delta T}{\Delta x}

Worked example

A glass window of area 1.5 m2^2 and thickness 5.0 mm has a temperature difference of 10 K across it. The thermal conductivity of glass is 1.0 W m−1^{-1} K−1^{-1}. Find the rate of energy transfer.

Why is trapped air a good thermal insulator?

Thermal radiation

Every body radiates energy; hotter bodies radiate far more and their spectrum peaks at shorter wavelengths.

A black body radiates power L=σAT4L = \sigma AT^4 and its spectrum peaks at λmax=2.9×10−3/T\lambda_{max} = 2.9\times10^{-3}/T. Apparent brightness bb is the intensity received at distance dd. Convert nm to m, and always use kelvin: the fourth power makes errors enormous.

0.511.522.530.20.40.60.81wavelength / μmrelative intensity6000 K5000 K4000 K6000 K5000 K4000 K
Black-body spectra: hotter bodies peak at shorter wavelengths
  • LuminosityL=σAT4L = \sigma AT^4
  • Brightnessb=L4πd2b = \dfrac{L}{4\pi d^2}
  • Peak wavelengthλmaxT=2.9×10−3\lambda_{max}T = 2.9\times10^{-3} m K

Worked example

The Sun's spectrum peaks at about 500 nm. Estimate its surface temperature.

Worked example

The Sun has a luminosity of 3.8×10263.8 \times 10^{26} W. Find its apparent brightness at the Earth, 1.5×10111.5 \times 10^{11} m away.

Star A is blue and star B is red. Which statement is correct?

Try an exam question

A 2.0 kW kettle heats 0.50 kg of water from 20 °C to 100 °C. The specific heat capacity of water is 4180 J kg⁻¹ K⁻¹. Calculate the minimum time this takes and state why the real time is longer.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

How long does the kettle take to bring the water to its boiling point of 100 °C?

1 mark, marked against the mark scheme

Revision notes