Electrical Power & Mains Electricity

Electrical Power & Mains Electricity Flashcards

Spec 2.2–6 · Edexcel IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

12 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 12 cards
State the equation linking power, current and voltage.
P = I × V.
State the equation linking energy transferred, current, voltage and time.
E = I × V × t.
What happens when current flows through a resistor?
Electrical energy is transferred and the temperature of the resistor increases.
What type of current does mains electricity supply?
Alternating current (a.c.), which regularly reverses direction.
What type of current does a cell or battery supply?
Direct current (d.c.), which flows in one direction only.
What is the purpose of insulation on wires?
To prevent users from touching live conductors, using a non-conducting covering material.
What is double insulation?
An appliance design with two independent layers of insulation and no metal casing, removing the need for an earth wire.
What does earthing do?
Connects an appliance's metal casing to the ground so that if a fault occurs, a large fault current flows to earth, blowing the fuse and disconnecting the appliance.
What is a fuse and how does it work?
A thin wire in a circuit that melts and breaks the circuit if the current exceeds a safe level, protecting the appliance and wiring.
How is a circuit breaker different from a fuse?
A circuit breaker automatically trips on overcurrent but can be reset and reused, unlike a fuse which must be replaced after melting.
How is the correct fuse rating chosen for an appliance?
Calculate the normal operating current using P = I × V, then choose a fuse rated slightly above this current.
Calculate the energy transferred by a 5 A current at 230 V over 20 s.
E = I × V × t = 5 × 230 × 20 = 23,000 J.

Flashcards