Resistivity, thermistors and superconductivity

Resistivity, thermistors and superconductivity Flashcards

Spec 3.5.1.3 · AQA A-Level Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

13 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 13 cards
State the equation for resistivity.
ρ=RAL\rho = \frac{R A}{L}
What is the unit of resistivity?
The ohm metre (Ω m).
How does the resistance of a wire change if its diameter is doubled?
It falls to a quarter, because the area increases by a factor of 4.
What happens to the resistance of a metal as its temperature rises?
It increases.
Why does the resistance of a metal increase with temperature?
The lattice ions vibrate more, so conduction electrons collide with them more often.
What is an ntc thermistor?
A thermistor whose resistance decreases as its temperature increases.
Why does the resistance of an ntc thermistor fall as it gets hotter?
More charge carriers are released, so the number of carriers per unit volume increases.
Give one application of an ntc thermistor.
A temperature sensor, for example in an incubator or thermostat.
What is a superconductor?
A material with zero resistivity at and below its critical temperature.
What is the critical temperature?
The temperature at and below which a material's resistivity is zero; it depends on the material.
Give two applications of superconductors.
Strong magnetic fields (coils in scanners) and power transmission with reduced energy loss.
In Required practical 5, what do you plot and what does the gradient give?
Plot R against L; the gradient is ρ / A, so ρ = gradient × A.
Why should the current be kept small in the resistivity experiment?
To avoid heating the wire, which would increase its resistance.

Flashcards