The Haber Process and NPK Fertilisers Flashcards
Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.
15 cards
Tap a card to flip it. Swipe right if you knew it, left if not.
See all 15 cards
- Name the three essential elements for plant growth that are found in NPK fertilisers.
- Nitrogen (N), Phosphorus (P), and Potassium (K)
- What is the purpose of fertilisers in agriculture?
- Fertilisers supply essential elements (N, P, K) to soil to increase crop yields
- Write the balanced equation for the Haber process.
- N₂ + 3H₂ ⇌ 2NH₃
- State the three conditions used in the Haber process.
- Temperature: approximately 450 °C; Pressure: approximately 200 atm (atmospheres); Catalyst: iron
- Explain why a temperature of 450 °C is used in the Haber process rather than a much lower temperature.
- Although lower temperatures give greater yield (the reaction is exothermic), the reaction rate would be too slow to be economically viable. 450 °C is a compromise between achieving acceptable yield and maintaining a reasonable reaction rate
- Explain why a pressure of approximately 200 atm is used in the Haber process rather than a much higher pressure.
- Although higher pressures would give greater yield (equilibrium shifts to the right for this reaction), very high pressures are expensive to produce and maintain, and they increase safety hazards. 200 atm is a compromise between yield and cost/safety
- What is the role of the iron catalyst in the Haber process?
- The iron catalyst increases the rate of reaction without affecting the equilibrium yield
- Name the industrial process that converts ammonia to nitric acid.
- The Ostwald process
- How is ammonium nitrate fertiliser produced from ammonia?
- Ammonia is first converted to nitric acid (via the Ostwald process), then ammonia and nitric acid react together to form ammonium nitrate
- Identify the three raw materials used to produce NPK fertilisers industrially and state which element each provides.
- Ammonia (provides nitrogen), phosphate rock (provides phosphorus), and potassium chloride or potassium sulfate (provides potassium)
- Describe how to produce ammonium sulfate fertiliser in the laboratory.
- React ammonia solution with sulfuric acid. The ammonia neutralises the acid to form ammonium sulfate salt
- What type of reaction occurs when ammonia solution reacts with an acid to form a fertiliser salt?
- A neutralisation reaction (acid-base reaction)
- Why is ammonia produced by the Haber process important for agriculture?
- Ammonia is the primary source of nitrogen in nitrogen fertilisers, which are essential for plant growth and increasing crop yields
- Explain the term 'compromise conditions' in the context of the Haber process.
- The chosen conditions (450 °C, 200 atm, iron catalyst) balance conflicting factors: lower temperatures favour yield but slow the reaction; higher pressures favour yield but increase costs and hazards. The selected conditions give an economically viable balance between reaction rate and product yield
- Name two potassium-containing compounds that can be used as raw materials in industrial NPK fertiliser production.
- Potassium chloride and potassium sulfate