Stress, strain and the Young modulus

Stress, strain and the Young modulus Flashcards

Spec 28–31 · Edexcel International A Level Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

12 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 12 cards
Define tensile stress and give its unit.
Force per unit cross-sectional area, σ = F/A, measured in pascals (Pa, N m⁻²).
Define tensile strain.
Change in length divided by original length, ε = ΔL/L. It has no unit.
Define the Young modulus.
Stress divided by strain, E = σ/ε, within the limit of proportionality. Unit: Pa.
What does the gradient of the straight part of a stress-strain graph give?
The Young modulus of the material.
What is the breaking stress?
The stress at which the material fractures.
How does a brittle material behave on a stress-strain graph?
The graph is a straight line up to fracture, with no plastic region, so it breaks suddenly.
Does the Young modulus depend on the shape and size of the sample?
No. It is a property of the material only. Stiffness k does depend on size and shape.
How do you find the area of a wire from its diameter?
A = πd²/4. Convert the diameter to metres first.
Core practical 3: why use a long, thin wire?
A long wire gives a larger extension, and a thin wire has a small area so a large stress, so the extension can be measured with a small percentage uncertainty.
Core practical 3: how is the diameter measured accurately?
With a micrometer screw gauge at several places and in perpendicular directions, then take the mean.
Core practical 3: how is E found from the graph of force against extension?
E = gradient × L / A, since the gradient is EA/L.
Core practical 3: give a safety precaution.
Wear safety goggles and place a box of sand under the masses in case the wire snaps.

Flashcards