Energy Transfers in Circuits

Energy Transfers in Circuits Flashcards

Spec 10.22–32 · Edexcel GCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

12 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 12 cards
Why does a resistor heat up when there is a current through it?
Electrons collide with ions in the lattice, transferring energy and increasing vibration, which raises the resistor's temperature.
How can unwanted heating in circuits be reduced?
By using low resistance wires.
Give an example of a device where the heating effect of current is useful.
A kettle, toaster, electric heater, or filament lamp (thermal/light energy is the useful output).
Give an example where the heating effect of current is a disadvantage.
In motors, computers or transmission cables, where heating wastes energy and can damage components.
Give the equation for energy transferred in a circuit.
E = I × V × t (energy = current × potential difference × time).
Define power.
The rate at which energy is transferred, measured in watts (1 watt = 1 joule per second).
Give the equation for power in terms of energy and time.
P = E ÷ t.
Give two equations for electrical power.
P = I × V and P = I² × R.
What does the power rating of an appliance tell you?
The rate at which it transfers energy — a higher rating means faster energy transfer for the same time of use.
A device has current 3 A and potential difference 4 V. What is its power?
12 W (P = I × V = 3 × 4 = 12 W).
A resistor has resistance 5 Ω and current 2 A. What is the power dissipated?
20 W (P = I² × R = 2² × 5 = 20 W).
A 100 W lamp is used for 10 s. How much energy is transferred?
1000 J (E = P × t = 100 × 10 = 1000 J).

Flashcards