A.1 Kinematics

A.1 Kinematics

IB Physics HL: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Displacement is a vector change in position; distance is a scalar path length.
  • Average values use totals; instantaneous values use the gradient of a tangent.
  • Gradient of ss–tt = velocity; gradient of vv–tt = acceleration; area under vv–tt = displacement.
  • The four equations of motion apply only to uniform acceleration.
  • A projectile has constant horizontal velocity and vertical acceleration gg, linked by time.
  • Drag reduces range and height, and a long fall ends at terminal speed.

Distance and displacement

Displacement is the vector change in position; distance is the scalar length of the path.

Motion is described using position, velocity and acceleration, measured from a chosen origin.

Displacement has magnitude and direction. Distance is the total length of the path.

A runner who completes a full 400 m lap has travelled 400 m but has zero displacement. After half a lap of a circular track, the displacement is the diameter, not the distance run.

displacement 60 mAB
Half a lap of a circular track: displacement is the diameter (1 unit = 10 m)

Worked example

A runner runs half a lap of a circular track of radius 30 m. Find the distance and the magnitude of the displacement.

A runner completes a full 400 m lap. What are the distance and the displacement?

Velocity and acceleration

Velocity is the rate of change of displacement and acceleration the rate of change of velocity; gradients give both.

Average velocity is total displacement ÷ total time. Average speed is total distance ÷ total time.

Instantaneous velocity is the gradient of the tangent to a displacement–time curve; instantaneous acceleration is the gradient of a velocity–time curve. From tabulated data, estimate it using a short interval centred on the instant.

The area under a velocity–time graph is the displacement. The area under an acceleration–time graph is the change in velocity.

0.511.522.533.54246810121416xyt = 1 st = 2 st = 3 ss = t²
Displacement–time graph s = t²: the gradient at a point is the velocity there

Worked example

A body has displacement s=t2s = t^2 (metres, seconds). Estimate its velocity at t=2.0t = 2.0 s using the readings at t=1.9t = 1.9 s and t=2.1t = 2.1 s.

What does the area under a velocity–time graph represent?

Equations of motion

Only when acceleration is uniform; otherwise work from graphs or data.

When the acceleration is uniform, four equations link displacement ss, initial velocity uu, final velocity vv, acceleration aa and time tt.

Choose the equation that contains the three quantities you know and the one you want. Take one direction as positive and give every vector a sign.

With non-uniform acceleration these equations are not valid. Find displacement from the area under the vv–tt graph (for example the trapezium method) and acceleration from gradients.

12345624681012141618xyu = 5v = 17v = 5 + 2t
v–t graph for u = 5 m/s, a = 2 m/s²: the area is the displacement
  • Velocityv=u+atv = u + at
  • Displacements=ut+12at2s = ut + \tfrac12 at^2
  • Without timev2=u2+2asv^2 = u^2 + 2as

Worked example

A car with u=15u = 15 m s⁻¹ accelerates at 2.0 m s⁻² for 6.0 s. Find its displacement and final speed. Another car brakes from 20 m s⁻¹ to rest in 40 m. Find its acceleration.

Which equation links u, v, a and s without t?

Projectile motion

Treat horizontal and vertical motion separately; time links them.

A projectile moves under gravity alone once launched. Resolve the launch velocity uu at angle θ\theta:

  • horizontal: ux=ucos⁡θu_x = u\cos\theta is constant, so x=uxtx = u_x t
  • vertical: uy=usin⁡θu_y = u\sin\theta changes with acceleration gg downwards

At the top of the path the vertical velocity is zero but the horizontal velocity is not.

On level ground the path is a symmetrical parabola, the time of flight is 2uy/g2u_y/g and the range is ux×u_x \times time of flight.

510152025303512345678xytop: 5.1 mrange: 35.3 mtrajectory
Path of a projectile launched at 20 m s⁻¹ at 30° (x and y in metres)

Worked example

A ball is launched at 20 m s⁻¹ at 30° above the horizontal from level ground. Find the time of flight, range and maximum height.

At the highest point of a projectile's path, which statement is true?

Fluid resistance

Drag opposes motion and grows with speed, so falling bodies reach a terminal speed.

Fluid resistance (drag) acts opposite to the velocity and increases with speed. For a projectile it:

  • reduces the horizontal velocity, so the range decreases
  • lowers the maximum height
  • makes the trajectory asymmetric, with a steeper descent than ascent
  • means the acceleration is no longer constant or purely vertical

A body falling through a fluid speeds up until the drag equals its weight. The resultant force is then zero and it falls at its terminal speed.

123456246810xyterminal speedstarts at restspeed
Speed of a body falling through a fluid approaches its terminal speed

A skydiver is falling at terminal speed. What is the resultant force on her?

Try an exam question

A stone is thrown horizontally at 12 m s⁻¹ from the top of a cliff 20 m above the sea. Ignore air resistance. Calculate the time taken to reach the sea and the horizontal distance travelled.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

What is the cyclist's speed at the end of the acceleration phase?

1 mark, marked against the mark scheme

Revision notes