B.5 Current and circuits

B.5 Current and circuits

IB Physics HL: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Current is the rate of flow of charge, I=Δq/ΔtI = \Delta q/\Delta t; potential difference is work done per unit charge, V=W/qV = W/q.
  • Resistance is R=V/IR = V/I and resistivity gives R=ρL/AR = \rho L/A.
  • Power is P=IV=I2R=V2/RP = IV = I^2R = V^2/R.
  • Series resistances add; for parallel resistors add the reciprocals.
  • A real cell has internal resistance rr, so its terminal pd is V=ε−IrV = \varepsilon - Ir.

Current and pd

Current is the flow of charge per second, and potential difference is the energy transferred per coulomb.

Current is the rate of flow of charge carriers, I=Δq/ΔtI = \Delta q/\Delta t (1 A = 1 C s⁻¹). In metals the carriers are free electrons. Conventional current is the direction of positive charge flow.

Potential difference is the work done per unit charge moving a positive charge between two points, V=W/qV = W/q (1 V = 1 J C⁻¹).

Conductors have many mobile carriers; insulators have very few.

ARV
The ammeter measures current (charge per second) through the resistor; the voltmeter measures the pd (energy per coulomb) across it
  • CurrentI=ΔqΔtI = \dfrac{\Delta q}{\Delta t}
  • Potential differenceV=WqV = \dfrac{W}{q}

Worked example

90 C of charge passes a point in 30 s. In a lamp, 6.0 C of charge transfers 36 J of energy. Find the current and the pd across the lamp.

What is 1 volt equal to?

Resistance and Ohm's law

Resistance is pd divided by current. It comes from carriers colliding with lattice ions, and depends on the material and the wire's shape.

Resistance is R=V/IR = V/I. It arises because moving carriers collide with vibrating lattice ions.

Resistivity ρ\rho is a property of the material: R=ρL/AR = \rho L/A (unit Ω m).

Ohm's law: the current in a conductor is proportional to the pd across it, if temperature and other conditions are constant. An ohmic conductor has constant resistance. A filament lamp is non-ohmic: more current heats the filament, the ions vibrate more, collisions increase and the resistance rises.

0.511.522.5324681012141618xyohmic: R = 2 Ωlamp: R = 3 Ωohmic resistorfilament lamp
V against I for an ohmic resistor (straight) and a filament lamp (curving up)
  • ResistanceR=VIR = \dfrac{V}{I}
  • ResistivityR=ρLAR = \dfrac{\rho L}{A}

Worked example

A nichrome wire is 2.0 m long with cross-sectional area 5.0×10−75.0\times10^{-7} m² and resistivity 1.1×10−61.1\times10^{-6} Ω m. Find its resistance.

Why does the resistance of a filament lamp rise as the current increases?

Electrical power

Power is energy transferred per second. Choose the form that uses the quantity shared by the components you compare.

The power dissipated in a resistor is P=IV=I2R=V2/RP = IV = I^2R = V^2/R.

Choose the form that uses the shared quantity:

  • I2RI^2R for components in series (same current)
  • V2/RV^2/R for components in parallel (same pd)
2468101220406080100120140xyP = V²/R
Power dissipated in a resistor against pd: P = V²/R (drag R: a smaller resistance dissipates more at the same pd)
  • Electrical powerP=IV=I2R=V2RP = IV = I^2R = \dfrac{V^2}{R}

Worked example

A lamp is rated 60 W at 230 V. Find its resistance and the current.

A 2 Ω and a 6 Ω resistor are in series. Which dissipates more power, and by what factor?

Series and parallel

In series the same current flows and the resistances add. In parallel the pd is shared and the reciprocals add.

Series: same current through each, pds add: Rs=R1+R2+…R_s = R_1 + R_2 + \dots

Parallel: same pd across each, currents add: 1Rp=1R1+1R2+…\dfrac{1}{R_p} = \dfrac{1}{R_1} + \dfrac{1}{R_2} + \dots

The combined parallel resistance is always less than the smallest individual resistance.

12 V6.0 Ω3.0 Ω
Parallel branches: each resistor has the full supply pd across it
12 V6.0 Ω3.0 Ω
Two resistors in series: the same current flows through each

Worked example

A 6.0 Ω and a 3.0 Ω resistor in parallel are connected in series with a 4.0 Ω resistor and a 12 V supply. Find the total resistance and the current.

What is the combined resistance of two identical 10 Ω resistors in parallel?

Cells and internal resistance

A real cell loses some of its emf across its own internal resistance, so the terminal pd falls as the current rises.

A cell's emf ε\varepsilon is the energy transferred to each coulomb of charge by the source. Chemical cells convert chemical energy; solar cells convert light.

Real cells have internal resistance rr, so ε=I(R+r)\varepsilon = I(R + r) and the terminal pd is V=ε−IrV = \varepsilon - Ir.

A variable resistor controls current, or acts as a potential divider. An LDR's resistance falls as light rises; an NTC thermistor's falls as temperature rises.

2468101214161820222424681012xyε = 12 V(2 A, 11 V)short circuit: 24 AV = ε − Ir
Terminal pd against current for a 12 V cell with r = 0.50 Ω
  • Terminal pdV=ε−IrV = \varepsilon - Ir
12 V4.0 kΩ2.0 kΩV
Potential divider: the supply pd is shared in proportion to resistance

Worked example

A cell of emf 12 V and internal resistance 0.50 Ω is connected to a 5.5 Ω resistor. Find the current and the terminal pd.

A thermistor (NTC) is heated. What happens to its resistance?

Try an exam question

A cell of emf 6.0 V and internal resistance 1.0 Ω is connected to a 5.0 Ω resistor. Calculate the current and the terminal pd.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

How much charge flows through the wire in this time?

1 mark, marked against the mark scheme

Revision notes