C.4 Standing waves and resonance

C.4 Standing waves and resonance

IB Physics HL: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • A standing wave forms when two identical waves travel in opposite directions, and it transfers no net energy along its length.
  • Nodes have zero amplitude and antinodes have maximum amplitude; adjacent nodes are λ/2\lambda/2 apart.
  • A closed pipe supports only odd harmonics; strings and open pipes support all harmonics.
  • Resonance occurs when the driving frequency equals the natural frequency, and amplitude is a maximum.
  • More damping lowers and broadens the resonance peak; critical damping returns the system to equilibrium fastest without oscillating.

Nodes and antinodes

Two identical waves travelling in opposite directions superpose to give a pattern that does not move along: fixed nodes and antinodes.

A standing wave forms when two identical waves (same frequency, wavelength and speed) travel in opposite directions, usually a wave and its reflection. The profile does not move along, and there is no net transfer of energy.

Nodes are points of zero amplitude. Antinodes are points of maximum amplitude. Adjacent nodes are λ/2\lambda/2 apart.

Points between two adjacent nodes oscillate in phase; neighbouring segments are in antiphase.

123456−1.5−1−0.50.511.5xynodenodeantinodetime tt + T/2
A standing wave at two instants half a period apart: nodes stay fixed

Standing wave

Amplitude:
Varies with position
Phase:
0 or π (in segments)
Energy transfer:
None along the wave

Travelling wave

Amplitude:
Same for all points
Phase:
Varies continuously
Energy transfer:
Along the wave

Two adjacent nodes are 0.30 m apart. What is the wavelength?

Strings and pipes

Only wavelengths that fit the ends make a standing wave. A closed pipe has a node at one end and an antinode at the other, so it supports odd harmonics only.

String fixed at both ends: nodes at both ends, L=nλ/2L = n\lambda/2, so fn=nv/2Lf_n = nv/2L with all harmonics.

Pipe open at both ends: antinodes at both ends. Also L=nλ/2L = n\lambda/2, with all harmonics.

Pipe closed at one end: node at the closed end, antinode at the open end. L=λ/4,3λ/4,…L = \lambda/4, 3\lambda/4, \dots so only odd harmonics, with f1=v/4Lf_1 = v/4L.

0.10.20.30.40.50.60.70.80.91−1−0.50.51xyn = 1n = 2n = 3closed pipe, fundamental
Harmonics 1 to 3 of a string fixed at both ends, and the fundamental of a closed pipe (dashed)

String

Ends:
Node, node
Harmonics:
All
Fundamental:
v/2Lv/2L

Open pipe

Ends:
Antinode, antinode
Harmonics:
All
Fundamental:
v/2Lv/2L

Closed pipe

Ends:
Node, antinode
Harmonics:
Odd only
Fundamental:
v/4Lv/4L

Worked example

A pipe closed at one end is 0.17 m long. The speed of sound is 340 m s⁻¹. Find the fundamental and the next frequency.

How does the fundamental of a closed pipe compare with an open pipe of the same length?

Resonance

When the driving frequency equals the natural frequency, energy transfers at the greatest rate and the amplitude is a maximum.

Every oscillating system has a natural frequency, the frequency at which it oscillates when displaced and released. A driving (forcing) frequency is imposed by an external periodic force.

When the driving frequency equals the natural frequency, resonance occurs. Energy is transferred at the greatest rate and the amplitude is a maximum.

The amplitude grows until the energy lost to damping each cycle equals the energy supplied.

0.20.40.60.811.21.41.61.82123456xyresonanceamplitude
Amplitude against driving frequency (natural frequency = 1), light damping

A child on a swing is pushed once per swing at the swing's natural frequency. What happens to the amplitude?

Damping and resonance curves

Damping removes energy each cycle. More damping gives a lower, broader peak at a slightly lower frequency.

Damping is the loss of energy from an oscillating system by resistive forces, reducing its amplitude.

Increasing damping:

  • lowers the maximum amplitude
  • makes the resonance peak broader (less sharp)
  • shifts the resonant frequency slightly lower than the natural frequency
0.20.40.60.811.21.41.61.82123456xyamplitude
Resonance curves: move the slider to increase the damping

A resonance curve is compared before and after damping is increased. Which change is seen?

Types of damping

Critical damping returns the system to equilibrium fastest without oscillating. Light damping oscillates; heavy damping is slower.

Light (under-) damping: the system oscillates many times with gradually decreasing amplitude, such as a pendulum in air.

Critical damping: the system returns to equilibrium in the shortest possible time without oscillating (car suspension, door closers).

Heavy (over-) damping: the system returns without oscillating but more slowly than with critical damping, such as a pendulum in thick oil.

12345678−1−0.50.51xylightcriticalheavy
Displacement against time for light, critical and heavy damping

A door closer should shut the door as fast as possible without it bouncing. Which damping is needed?

Try an exam question

A string of length 0.60 m is fixed at both ends and vibrates in its fundamental mode at 250 Hz. Sketch the pattern in words and calculate the speed of waves on the string.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

What is the wavelength of the wave on the string in the first harmonic?

1 mark, marked against the mark scheme

Revision notes