Reversible Reactions and Equilibrium

Reversible Reactions and Equilibrium Flashcards

Spec 6.3 · Cambridge IGCSE Chemistry: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

16 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 16 cards
What symbol is used to represent a reversible reaction?
⇌ (reversible arrow or equilibrium arrow)
Define a reversible reaction.
A chemical reaction that can proceed in both the forward and reverse directions, with reactants converting to products and products converting back to reactants.
Give two examples of reversible reactions involving colour changes.
Hydrated copper(II) sulfate (blue) ⇌ anhydrous copper(II) sulfate (white) + water; 2. Hydrated cobalt(II) chloride (pink) ⇌ anhydrous cobalt(II) chloride (blue) + water
What happens to hydrated copper(II) sulfate when heated?
It loses water and turns from blue to white (forms anhydrous copper(II) sulfate). When water is added, it turns blue again.
Define chemical equilibrium in a closed system.
A state where the rate of the forward reaction equals the rate of the reverse reaction, and the concentrations of reactants and products remain constant (though not necessarily equal).
State the conditions for the Haber process.
Temperature: 450°C; Pressure: 20000 kPa (or 200 atm); Catalyst: iron
Write the symbol equation for the Haber process.
N₂(g) + 3H₂(g) ⇌ 2NH₃(g)
Name the sources of nitrogen and hydrogen in the Haber process.
Nitrogen: from air (nitrogen makes up approximately 78% of air); Hydrogen: from methane (natural gas)
Write the symbol equation for the Contact process.
2SO₂(g) + O₂(g) ⇌ 2SO₃(g)
State the conditions for the Contact process.
Temperature: 450°C; Pressure: 200 kPa (or 2 atm); Catalyst: vanadium(V) oxide
Name the sources of sulfur dioxide and oxygen in the Contact process.
Sulfur dioxide: from burning sulfur or roasting sulfide ores; Oxygen: from air
Explain how increasing temperature affects the position of equilibrium in an exothermic reaction.
Increasing temperature favours the endothermic (reverse) reaction, so the equilibrium shifts to the left, decreasing the yield of products.
Explain how increasing pressure affects the equilibrium position in the Haber process (N₂ + 3H₂ ⇌ 2NH₃).
Increasing pressure favours the side with fewer gas molecules (forward reaction produces 2 molecules from 4), so equilibrium shifts right, increasing ammonia yield.
Explain why the Haber process uses a high pressure of 20000 kPa despite this shifting equilibrium left in terms of rate and equilibrium.
High pressure increases the rate of reaction significantly, allowing faster ammonia production. Although it slightly decreases equilibrium yield (exothermic), the faster rate makes it economically worthwhile for industrial production.
Why does the Contact process use a lower pressure (200 kPa) compared to the Haber process?
The Contact process has equal numbers of gas molecules on both sides (2 + 1 = 2), so pressure has minimal effect on equilibrium position. Lower pressure reduces costs and safety risks without significantly reducing yield.
Explain why a catalyst is used in the Haber and Contact processes.
A catalyst increases the rate of both forward and reverse reactions equally, allowing equilibrium to be reached faster without affecting the equilibrium position itself. This improves industrial efficiency and economics.

Flashcards