Industrial Processes & Equilibrium

Industrial Processes & Equilibrium Flashcards

Spec 3.8.2 · Oxford AQA IGCSE Chemistry: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

12 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 12 cards
What is equilibrium in a reversible reaction?
The state in a closed system where the forward and reverse reactions occur at exactly the same rate, so the relative amounts of reactants and products stay constant.
What is a closed system?
A system in which no reactants or products can enter or escape.
How does raising temperature affect the yield at equilibrium?
It increases the yield from the endothermic direction and decreases the yield from the exothermic direction.
How does increasing pressure affect a gaseous equilibrium?
It favours the side of the reaction that produces fewer molecules of gas.
How does decreasing pressure affect a gaseous equilibrium?
It favours the side of the reaction that produces the greater number of gas molecules.
What three factors are balanced when choosing industrial reaction conditions?
Yield of product, rate of reaction, and cost (energy/equipment).
State the equation for the Haber process.
N₂ + 3H₂ ⇌ 2NH₃.
What conditions are used in the Haber process?
Iron catalyst, about 450°C, about 200 atmospheres pressure.
What conditions are used in the Contact process (Stage 2)?
Vanadium(V) oxide catalyst, about 450°C, atmospheric pressure.
Why is atmospheric (not high) pressure used in the Contact process?
The reaction already gives a good yield at atmospheric pressure, so the extra cost of higher pressure is not worthwhile.
What happens to ammonia and unreacted gases in the Haber process?
Ammonia liquefies on cooling and is removed; unreacted nitrogen and hydrogen are recycled back into the reactor.
Why might a manufacturer not use the temperature that gives the maximum possible yield?
Because it might make the rate of reaction too slow or the process too costly, so a compromise temperature is chosen instead.

Flashcards