Transferring Electrical Energy

Transferring Electrical Energy Flashcards

Spec 3.6.5 · Oxford AQA IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

12 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 12 cards
What energy transfer does a lamp make?
Electrical energy to light energy (with some wasted thermal energy).
What energy transfer does an electric motor make?
Electrical energy to kinetic energy.
State the equation for power in terms of energy and time.
P = E / t.
State the equation for power in terms of current and potential difference.
P = I × V.
How can P = I × V be used in relation to fuses?
It can be used to calculate the current an appliance draws, to determine the correct fuse rating needed.
State the equation for energy transferred in terms of potential difference and charge.
E = V × Q.
What unit is mains electrical energy usually measured in for billing purposes?
Kilowatt-hours (kWh).
State the equation for energy in kilowatt-hours.
E (kWh) = P (kW) × t (h).
How do you calculate the cost of electricity used?
Cost = energy used (kWh) × cost per kWh.
A 3 kW appliance runs for 2 hours. How much energy in kWh does it use?
E = P × t = 3 × 2 = 6 kWh.
A charge of 10 C flows through a 6 V component. How much energy is transferred?
E = V × Q = 6 × 10 = 60 J.
An appliance operates at 230 V and draws 5 A. What is its power?
P = I × V = 5 × 230 = 1150 W.

Flashcards