Kp and calculating equilibrium constants

Kp and calculating equilibrium constants

Edexcel A-Level Chemistry: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Partial pressure = mole fraction ×\times total pressure; mole fractions add to 1.
  • KpK_p uses partial pressures of gases only, products over reactants, in atm.
  • Work out units by substituting units into the expression and cancelling.
  • For calculations: find equilibrium amounts first, then concentrations or partial pressures.

Partial pressure

A gas in a mixture exerts a partial pressure: its mole fraction multiplied by the total pressure.

Each gas has a partial pressure, the pressure it would exert if it alone occupied the container. Partial pressures add up to the total pressure. Mole fractions add up to 1.

In Edexcel A Level questions, partial pressures are given in atm.

00.511.522.53N₂H₂GasPartial pressure (atm)
Worked example (4.0 atm total): N₂ is 2.0 of 8.0 mol, so 0.25 × 4.0 = 1.0 atm; H₂ is 0.75 × 4.0 = 3.0 atm. They add to 4.0 atm.
  • Mole fraction of Amoles of Atotal moles of gas\dfrac{\text{moles of A}}{\text{total moles of gas}}
  • Partial pressurepA=mole fraction×Ptotalp_A = \text{mole fraction} \times P_{\text{total}}

Worked example

A mixture contains 2.0 mol NX2\ce{N2} and 6.0 mol HX2\ce{H2} at a total pressure of 4.0 atm. Find the partial pressure of NX2\ce{N2}.

Mole fractions of all gases in a mixture add up to:

The Kp expression

KpK_p is written like KcK_c but with partial pressures, and only gases appear.

For aA(g)+bB(g)⇌cC(g)+dD(g)aA(g) + bB(g) \rightleftharpoons cC(g) + dD(g), products go on top and reactants on the bottom, each partial pressure raised to the power of its coefficient.

In a heterogeneous equilibrium only gases appear, as solids have no partial pressure. For C(s)+COX2(g)⇌2 CO(g)\ce{C(s) + CO2(g) <=> 2CO(g)}, Kp=pCO2pCOX2K_p = \dfrac{p_{\ce{CO}}^2}{p_{\ce{CO2}}}.

  1. 1

    Write the balanced equation

    e.g. C(s) + CO₂(g) ⇌ 2CO(g)

  2. 2

    Keep only the gases

    solids have no partial pressure

  3. 3

    Products on top, reactants below

    each p raised to the power of its coefficient

  4. 4

    Result

    Kp = p(CO)² ÷ p(CO₂)

Writing a Kp expression.
  • KpK_ppC c pD dpA a pB b\dfrac{p_C^{\,c}\,p_D^{\,d}}{p_A^{\,a}\,p_B^{\,b}}

Which species is left out of KpK_p for C(s)+COX2(g)⇌2 CO(g)\ce{C(s) + CO2(g) <=> 2CO(g)}?

Units of Kc and Kp

Substitute the units into the expression and cancel. Equal numbers of terms on top and bottom give no units.

Work the units out by substituting the units of each term and cancelling. If there are the same number of terms on the top and bottom lines there are no units; write "no units".

  1. 1

    Write the expression

    e.g. Kp = p(NH₃)² ÷ [p(N₂) × p(H₂)³]

  2. 2

    Substitute the unit of each term

    atm² ÷ (atm × atm³)

  3. 3

    Count the terms top and bottom

    equal numbers: no units

  4. 4

    Cancel

    atm² ÷ atm⁴ = atm⁻²

Finding the units of Kp or Kc.

Expression

NX2OX4⇌2 NOX2\ce{N2O4 <=> 2NO2} (KpK_p):
p2p\dfrac{p^2}{p}
NX2+3 HX2⇌2 NHX3\ce{N2 + 3H2 <=> 2NH3} (KpK_p):
p2p×p3\dfrac{p^2}{p \times p^3}
HX2+IX2⇌2 HI\ce{H2 + I2 <=> 2HI} (KpK_p):
p2p×p\dfrac{p^2}{p \times p}
2 SOX2+OX2⇌2 SOX3\ce{2SO2 + O2 <=> 2SO3} (KcK_c):
(mol dm−3)2(mol dm−3)3\dfrac{(\text{mol dm}^{-3})^2}{(\text{mol dm}^{-3})^3}

Units

NX2OX4⇌2 NOX2\ce{N2O4 <=> 2NO2} (KpK_p):
atm
NX2+3 HX2⇌2 NHX3\ce{N2 + 3H2 <=> 2NH3} (KpK_p):
atm−2^{-2}
HX2+IX2⇌2 HI\ce{H2 + I2 <=> 2HI} (KpK_p):
no units
2 SOX2+OX2⇌2 SOX3\ce{2SO2 + O2 <=> 2SO3} (KcK_c):
dm3^3 mol−1^{-1}

What are the units of KpK_p for HX2+IX2⇌2 HI\ce{H2 + I2 <=> 2HI}?

Calculating Kc

Find the equilibrium amounts using the mole ratio, divide by volume, then substitute.

  1. Write the balanced equation and KcK_c expression.
  2. Use initial amounts and one equilibrium amount to find every equilibrium amount.
  3. Divide by the volume (dm3^3) to get concentrations.
  4. Substitute, with units and suitable significant figures.
  1. 1

    Equation and expression

    balanced equation, KcK_c

  2. 2

    Equilibrium amounts

    use the mole ratio

  3. 3

    Concentrations

    divide by volume in dm3^3

  4. 4

    Substitute

    units and significant figures

Worked example

1.00 mol NX2\ce{N2} and 3.00 mol HX2\ce{H2} in a 2.00 dm3^3 vessel give 0.400 mol NHX3\ce{NH3} at equilibrium. Calculate KcK_c for NX2+3 HX2⇌2 NHX3\ce{N2 + 3H2 <=> 2NH3}.

Which values go into the Kc expression?

Calculating Kp

The method is similar, but you convert equilibrium amounts into partial pressures.

  1. Work out the equilibrium amount of each gas.
  2. Work out total moles of gas and each mole fraction.
  3. Multiply by the total pressure for partial pressures.
  4. Substitute into KpK_p and give units.
  1. 1

    Equilibrium amounts

    each gas

  2. 2

    Mole fractions

    amount divided by total moles

  3. 3

    Partial pressures

    mole fraction times total pressure

  4. 4

    Substitute

    KpK_p with units

Worked example

The same equilibrium (0.800 mol NX2\ce{N2}, 2.40 mol HX2\ce{H2}, 0.400 mol NHX3\ce{NH3}) is at a total pressure of 10.0 atm. Calculate KpK_p.

Partial pressures in a mixture add up to:

Try an exam question

At equilibrium a mixture contains 0.50 mol N2O4 and 1.0 mol NO2 at a total pressure of 3.0 atm. Calculate Kp for N2O4(g) <=> 2NO2(g), with units.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

What is the partial pressure of NO₂ in the equilibrium mixture?

1 mark, marked against the mark scheme

Revision notes