Standard electrode potentials

Standard electrode potentials

Edexcel A-Level Chemistry: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Oxidation is loss of electrons (oxidation number rises); reduction is gain (it falls).
  • E⊖E^\ominus is the e.m.f. of a half-cell against the SHE, at 298 K, 100 kPa and 1.00 mol dm−3^{-3}.
  • The SHE is HX2\ce{H2} (100 kPa) on platinum in 1.00 mol dm−3^{-3} HX+\ce{H+}; E⊖=0.00E^\ominus = 0.00 V.
  • Use a platinum electrode where there is no solid metal in the half-cell.

Redox as electron transfer

Oxidation is loss of electrons and a rise in oxidation number. Reduction is gain of electrons and a fall.

This applies to s-block (2 Na+ClX2→2 NaCl\ce{2Na + Cl2 -> 2NaCl}: Na 0 to +1, Cl 0 to −1-1), p-block and d-block elements (FeX2+→FeX3+\ce{Fe^2+ -> Fe^3+}, MnOX4X−→MnX2+\ce{MnO4- -> Mn^2+}, CrX2OX7X2−→CrX3+\ce{Cr2O7^2- -> Cr^3+}).

Rules: free elements are 0; a simple ion equals its charge; O is −2-2 (not in peroxides); H is +1+1 (not in metal hydrides); the sum equals the overall charge.

−2−1.5−1−0.500.511.52Cl⁻ (−1)Na, Cl₂ (0)Na⁺ (+1)

Oxidation

Electrons:
Loss of electrons
Oxidation number:
Rises
Example:
FeX2+→FeX3+\ce{Fe^2+ -> Fe^3+}

Reduction

Electrons:
Gain of electrons
Oxidation number:
Falls
Example:
MnOX4X−→MnX2+\ce{MnO4- -> Mn^2+}

Worked example

Show that MnOX4X−\ce{MnO4-} is reduced when it forms MnX2+\ce{Mn^2+}.

Which species is reduced in Cl2 + 2e- -> 2Cl-?

Standard electrode potential

E⊖E^\ominus is the e.m.f. of a half-cell measured against the standard hydrogen electrode under standard conditions.

Standard conditions: 298 K, 100 kPa for gases and 1.00 mol dm−3^{-3} for ions in solution.

E⊖E^\ominus is written for the reduction half-equation, e.g. CuX2++2 eX−⇌Cu\ce{Cu^2+ + 2e- <=> Cu}, E⊖=+0.34E^\ominus = +0.34 V. A more positive E⊖E^\ominus means a greater tendency for the species on the left to be reduced.

−0.500.51Zn²⁺/ZnH⁺/H₂Cu²⁺/CuFe³⁺/Fe²⁺Cl₂/Cl⁻Half-cellE° (V)
Standard electrode potentials E° (V) for reduction half-equations; the more positive, the greater the tendency to be reduced

Temperature

Value:
298 K
Applies to:
All half-cells

Gas pressure

Value:
100 kPa
Applies to:
Gas half-cells

Ion concentration

Value:
1.00 mol dm−3^{-3}
Applies to:
Ions in solution

A half-cell with a more positive E⊖E^\ominus is more likely to:

The standard hydrogen electrode

The SHE is the reference half-cell, defined as 0.00 V. A single half-cell potential cannot be measured alone.

Half-equation: 2 HX+(aq)+2 eX−⇌HX2(g)\ce{2H+(aq) + 2e- <=> H2(g)}, E⊖=0.00E^\ominus = 0.00 V by definition.

A reference electrode is needed because only a potential difference between two half-cells can be measured. Platinum is inert, conducts and provides a surface for the equilibrium.

  1. 1

    Hydrogen gas

    100 kPa, bubbled continuously

  2. 2

    Platinum electrode

    inert, conducts, surface for the equilibrium

  3. 3

    Acid solution

    1.00 mol dm−3^{-3} HX+(aq)\ce{H+(aq)}

  4. 4

    Temperature

    298 K, giving E⊖=0.00E^\ominus = 0.00 V

Why is platinum used in the SHE?

Measuring E° (Core Practical 10)

Connect each half-cell to the SHE with a salt bridge and a high-resistance voltmeter at 298 K.

Three types of half-cell: metal in its ion (ZnX2+/Zn\ce{Zn^2+/Zn}), a non-metal (ClX2/ClX−\ce{Cl2/Cl-}) and two ions of the same element (FeX3+/FeX2+\ce{Fe^3+/Fe^2+}).

Always connect to the SHE with a salt bridge (filter paper soaked in potassium nitrate solution) and a high-resistance voltmeter so negligible current flows. The reading is E⊖E^\ominus of the half-cell.

  1. 1

    Set up the half-cell

    Electrode in 1.00 mol dm⁻³ of its ions (platinum for non-metals and ion pairs).

  2. 2

    Set up the SHE

    Hydrogen at 100 kPa over platinum in 1.00 mol dm⁻³ H⁺.

  3. 3

    Join with a salt bridge

    Filter paper soaked in potassium nitrate solution.

  4. 4

    Read the high-resistance voltmeter

    At 298 K the reading is E° of the half-cell.

Measuring E° of a half-cell

Electrode

Metal / metal ion:
the metal
Non-metal / its ion:
platinum
Two ions, one element:
platinum

Solution

Metal / metal ion:
1.00 mol dm−3^{-3} of its ions
Non-metal / its ion:
gas at 100 kPa, 1.00 mol dm−3^{-3} of its ions
Two ions, one element:
both ions at 1.00 mol dm−3^{-3}

Which electrode is used for the Fe3+/Fe2+ half-cell?

Try an exam question

Describe how you would measure the standard electrode potential of the Fe3+/Fe2+ half-cell.

[5 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

What is the oxidation number of chromium in the dichromate(VI) ion, Cr₂O₇²⁻?

1 mark, marked against the mark scheme

Revision notes