Standard electrode potentials and the hydrogen electrode

Standard electrode potentials and the hydrogen electrode

Spec 16.1–6 · Edexcel International A Level Chemistry: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Oxidation is loss of electrons (oxidation number rises); reduction is gain (oxidation number falls).
  • E° is measured against the SHE at 298 K, 100 kPa and 1.00 mol dm⁻³.
  • The standard hydrogen electrode has platinum, HX2\ce{H2} at 100 kPa and 1.00 mol dm⁻³ HX+\ce{H+}, and E° = 0.00 V by definition.
  • Only a potential difference can be measured, so a reference electrode is needed.
  • Use an inert platinum electrode for non-metals and for two ions of the same element.
  • A high-resistance voltmeter and a salt bridge complete the measurement.

Redox and oxidation numbers

Oxidation is loss of electrons and a rise in oxidation number; reduction is gain and a fall.

Oxidation is loss of electrons (oxidation number increases); reduction is gain (oxidation number decreases): OIL RIG.

Rules: uncombined elements 0; compounds sum to 0, ions to their charge; H +1; O −2 (−1 in peroxides); F −1.

Examples: Mg→MgX2+\ce{Mg -> Mg^2+} (s-block), ClX2→2 ClX−\ce{Cl2 -> 2Cl-} (p-block), FeX2+→FeX3+\ce{Fe^2+ -> Fe^3+} (d-block).

An oxidising agent is reduced; a reducing agent is oxidised. The oxidation number is the charge if all bonds were ionic.

−2−1.5−1−0.500.511.522.53Cl⁻ (−1)Mg, Cl₂ (0)Mg²⁺ (+2)
Oxidation numbers: Mg goes from 0 to +2 (oxidised, loss of electrons); Cl₂ goes from 0 to −1 (reduced, gain of electrons)
  • Oxidationloss of electrons, oxidation number up
  • Reductiongain of electrons, oxidation number down

Worked example

In CrX2OX7X2−+14 HX++6 FeX2+→2 CrX3++6 FeX3++7 HX2O\ce{Cr2O7^2- + 14H+ + 6Fe^2+ -> 2Cr^3+ + 6Fe^3+ + 7H2O}, which species is oxidised and which is reduced?

What is the oxidation number of nitrogen in NOX3X−\ce{NO3-}?

What E° means

E° is the emf of a half-cell connected to the standard hydrogen electrode under standard conditions.

A half-cell links two forms of a species by an equilibrium, written as a reduction: CuX2++2 eX−⇌Cu\ce{Cu^2+ + 2e- <=> Cu}.

The standard electrode potential, E°, is the emf when the half-cell is connected to a standard hydrogen electrode under standard conditions: 298 K, gases at 100 kPa, ions at 1.00 mol dm⁻³.

More positive E°: the left-hand species is a stronger oxidising agent. More negative E°: the right-hand species is a stronger reducing agent.

−1−0.8−0.6−0.4−0.200.20.40.60.81Zn²⁺/Zn −0.762H⁺/H₂ 0.00Cu²⁺/Cu +0.34Ag⁺/Ag +0.80
Standard electrode potentials, E° in volts: the more positive the value, the stronger the oxidising agent on the left
  • Standard conditions298 K, 100 kPa, 1.00 mol dm⁻³

A half-cell has a very negative E°. What does this tell you?

The standard hydrogen electrode

Only a potential difference can be measured, so the SHE, defined as 0.00 V, is the reference.

The potential of one half-cell cannot be measured alone, so a reference electrode is used. The standard hydrogen electrode (SHE) is the half-cell 2 HX+(aq)+2 eX−⇌HX2(g)\ce{2H+(aq) + 2e- <=> H2(g)}, assigned E° = 0.00 V.

Platinum is inert and conducts electrons. Platinum black has a large surface area that adsorbs hydrogen, so equilibrium is set up quickly.

  1. 1

    Gas

    Hydrogen at 100 kPa bubbled over the electrode

  2. 2

    Solution

    1.00 mol dm⁻³ HX+(aq)\ce{H+(aq)}, such as hydrochloric acid

  3. 3

    Temperature

    298 K

  4. 4

    Electrode

    Platinum coated with platinum black

Parts of the SHE

Why is a platinum electrode used in the SHE?

Measuring E° for each half-cell type

Join the half-cell to the SHE with a salt bridge and read a high-resistance voltmeter; use platinum when no metal is present.

A salt bridge (filter paper soaked in potassium nitrate) joins the half-cells. A high-resistance voltmeter draws almost no current, so concentrations stay constant. Its reading is E°; the sign shows the polarity.

Where there is no metal to act as the electrode, use inert platinum.

  1. 1

    Set up both half-cells

    the test half-cell and the SHE, at standard conditions

  2. 2

    Platinum if needed

    use an inert platinum electrode where there is no metal

  3. 3

    Salt bridge

    filter paper soaked in potassium nitrate joins the half-cells

  4. 4

    High-resistance voltmeter

    draws almost no current, so the reading is E°

Measuring E° of a half-cell against the standard hydrogen electrode

Metal and its ion

Example:
Cu²⁺ | Cu
Electrode:
The metal itself
Solution or gas:
1.00 mol dm⁻³ of its ions

Non-metal and its ion

Example:
Cl₂ | Cl⁻
Electrode:
Platinum
Solution or gas:
1.00 mol dm⁻³ Cl⁻ with Cl₂ at 100 kPa bubbled over it

Two ions of one element

Example:
Fe³⁺ | Fe²⁺
Electrode:
Platinum
Solution or gas:
Both ions at 1.00 mol dm⁻³

Which electrode is used for the Fe³⁺ | Fe²⁺ half-cell?

Core Practical 12

Build cells from metals in 1.00 mol dm⁻³ solutions of their ions and compare the voltages with E° data.

Build cells from half-cells of metals in 1.00 mol dm⁻³ solutions of their ions and measure the cell voltage. Compare readings with values calculated from E° data.

Small differences arise from non-standard conditions, impure or oxidised surfaces, and the voltmeter drawing some current. Clean strips with emery paper.

  1. 1

    Clean the metals

    Rub each strip with emery paper to remove the oxide layer

  2. 2

    Prepare solutions

    Fresh solutions of known concentration at about 298 K

  3. 3

    Join the half-cells

    Salt bridge of filter paper soaked in potassium nitrate; fresh strip for each pair

  4. 4

    Measure

    Read the high-resistance voltmeter and record the polarity

  5. 5

    Compare

    With values calculated from E° data

Method for Core Practical 12

Why is the metal strip cleaned with emery paper?

Try an exam question

Describe how you would measure the standard electrode potential of the Fe³⁺ | Fe²⁺ half-cell. Give the details of the reference electrode and the conditions.

[5 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

What is the oxidation number of chromium in the dichromate(VI) ion, Cr₂O₇²⁻?

1 mark, marked against the mark scheme

Revision notes