States of matter and particle model

States of matter and particle model

IB MYP Sciences: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Solids, liquids and gases differ in the arrangement, movement and forces between their particles.
  • Changes of state are physical changes: the particles stay the same.
  • On a heating curve, flat parts are changes of state and energy overcomes the forces between particles.
  • A pure substance melts at one sharp temperature; stronger forces mean higher melting and boiling points.
  • The particle model is useful but simplified.

Solids, liquids and gases

All matter is made of particles, and the particle model explains the properties of the three states.

All matter is made of tiny particles (atoms, molecules or ions). Solids and liquids are hard to compress because their particles already touch. Gases can be compressed because there are large spaces between the particles.

Solid

Liquid

Gas

The particle model of the three states.

Solid

Shape:
Fixed
Volume:
Fixed
Flow and compression:
Cannot be compressed or poured

Liquid

Shape:
Takes the shape of its container
Volume:
Fixed
Flow and compression:
Flows; almost impossible to compress

Gas

Shape:
No fixed shape
Volume:
Fills its container
Flow and compression:
Flows; easily compressed

Why can a gas be compressed?

Arrangement, movement and forces

Stronger forces hold solid particles in place; weaker forces let liquid particles slide; gas particles are far apart.

Particles do not change size when a substance changes state. Only their arrangement, spacing and movement change.

Solid

Liquid

Gas

Particle diagrams of the three states: regular and touching, close but irregular, far apart

Solid

Arrangement:
Touching in a regular pattern
Movement and forces:
Strong forces: only vibrate about fixed positions

Liquid

Arrangement:
Close together but irregular
Movement and forces:
Weaker forces: slide past each other

Gas

Arrangement:
Far apart
Movement and forces:
Move quickly and randomly; forces very weak

In which state do particles only vibrate about fixed positions?

Changes of state

Changes of state are physical changes: the particles stay the same but their energy and arrangement change.

In evaporation the fastest particles escape from the surface, so the remaining liquid cools. It is faster when warmer, windier, drier or when the surface area is larger.

  1. 1

    Melting

    solid to liquid, at the melting point

  2. 2

    Boiling or evaporation

    liquid to gas

  3. 3

    Condensation

    gas to liquid

  4. 4

    Freezing

    liquid to solid, at the melting point

Then back to step 1

Changes of state

Change

  • Melting
  • Freezing
  • Boiling
  • Evaporation
  • Condensation
  • Sublimation

From, to

  • Solid to liquid
  • Liquid to solid
  • Liquid to gas
  • Liquid to gas
  • Gas to liquid
  • Solid straight to gas

Notes

  • At the melting point
  • At the melting point
  • Throughout the liquid, at the boiling point
  • At the surface only, at any temperature below boiling
  • At the boiling point or below
  • For example dry ice

Where does evaporation happen?

Heating and cooling curves

Sloping parts raise the temperature; flat parts are changes of state.

On the sloping parts, one state is being heated and the energy raises the kinetic energy of the particles. On the flat parts a change of state is happening and the energy is used to overcome the forces between particles, so temperature stays constant. The first flat part is the melting point; the second is the boiling point. A cooling curve is the reverse.

2468101214161820−2020406080100120TimeTemperature (°C)Melting pointBoiling pointSolidMeltingLiquidBoilingGas
Heating curve: flat parts are melting and boiling.

Why is the temperature constant during melting?

Melting and boiling points

Melting and boiling points tell you the state at a given temperature.

A pure substance melts at one sharp fixed temperature. An impure substance melts over a range, at a lower temperature. Stronger forces between particles mean higher melting and boiling points.

−20−1001020304050607080-7 melting point2559 boiling point

Worked example

A substance has a melting point of -7 °C and a boiling point of 59 °C. What state is it in at 25 °C?

A substance melts at 10 °C and boils at 80 °C. What state is it at 50 °C?

Limits of the particle model

The particle model is useful but simplified, and a good scientist can describe its limits.

A particle diagram is a model, so it leaves things out. Always state a strength and a limit when evaluating a model.

Solid

Gas

A particle diagram draws particles as equal spheres: it shows spacing and arrangement but not the forces, the real shapes or the movement

In a particle diagram

  • Particles are drawn as solid spheres
  • Forces are not shown
  • Spaces and sizes
  • A 2D picture

The limit

  • Real atoms and molecules are not hard balls
  • The forces between particles are missing
  • Not drawn to scale
  • Cannot show the movement of particles

Which is a limit of a particle diagram?

Try an exam question

Describe the arrangement and movement of the particles in a liquid, and explain why a liquid takes the shape of its container.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

What is the name of the change of state shown by the dry ice?

1 mark, marked against the mark scheme

Revision notes