2.6 Modelling skills

2.6 Modelling skills

IB Maths: Applications and Interpretation SL: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Modelling is a cycle: develop, fit, test and reflect, then use the model.
  • Choose the model from the shape of the data, the properties of the curve and the context.
  • Find parameters from initial conditions, by substituting points, or by solving simultaneous equations on the GDC.
  • Always state the domain: the inputs that make sense in the situation.
  • Extrapolation outside the data can be very unreliable.

The modelling process

Modelling turns a real situation into mathematics and back again, and you repeat the cycle until the model is reasonable.

Mathematical modelling moves from a real situation to mathematics and back. Follow the cycle: develop the model (understand the context, choose a function type), fit it (find the parameters from the data), test and reflect, then use it.

If the model is not reasonable, return to the first step and adjust it. You use the SL 2.5 models: linear, quadratic, exponential, direct and inverse variation, cubic and sinusoidal. Regression is topic 4; you do not perform non-linear regressions at SL.

  1. 1

    Develop

    understand the context and choose a function type

  2. 2

    Fit

    find the parameters from the data

  3. 3

    Test and reflect

    compare the model with the data and the context

  4. 4

    Use

    read values, interpret and predict

Then back to step 1

The modelling cycle

The model gives a negative population. Which step comes next?

Choosing a model and its domain

Match the shape of the data and the context to a function type, then restrict the domain to what makes sense.

Choose the model from the shape of the data, the properties of the curve and the context.

The domain is the set of inputs that make sense. Time cannot be negative, a tank cannot hold more than its capacity and a count cannot be fractional. Example: V(t)=40+25tV(t)=40+25t for a tank of capacity 400 litres gives 40+25t≤40040+25t\le400, so 0≤t≤14.40\le t\le14.4.

Linear

  • Constant rate of change

Quadratic

  • One maximum or minimum

Exponential

  • Same factor for equal steps, or levelling off

Sinusoidal

  • Regular repeating cycle
246810121416100200300400xycapacity 400(14.4, 400)(0, 40)V = 40 + 25t
A tank model V = 40 + 25t is only valid until the tank is full at t = 14.4.

The data show a population doubling every 5 years. Best model?

Finding the parameters

Use initial conditions, substitute known points, or solve simultaneous equations on the GDC.

Initial conditions: for f(t)=katf(t)=ka^t, f(0)=kf(0)=k. For asin⁡(bt)+da\sin(bt)+d, a=max⁡−min⁡2a=\frac{\max-\min}{2}, d=max⁡+min⁡2d=\frac{\max+\min}{2} and b=360periodb=\frac{360}{\text{period}}.

Substitution of points: through (0,50)(0,50) and (3,400)(3,400) with f(t)=katf(t)=ka^t: k=50k=50 and 50a3=40050a^3=400, so a=2a=2.

Simultaneous equations (GDC): one equation per unknown, up to three. For y=ax2+bx+cy=ax^2+bx+c through (0,5)(0,5), (1,9)(1,9) and (3,29)(3,29): c=5c=5, a+b+c=9a+b+c=9, 9a+3b+c=299a+3b+c=29, so a=2a=2, b=2b=2, c=5c=5.

0.511.522.533.54200400600800xy(0, 50)(3, 400)f(t) = 50 × 2ᵗ
Fitting f(t) = 50 × 2ᵗ through (0, 50) and (3, 400): the initial condition gives k = 50, the second point gives a = 2.

Initial conditions

How:
Use t=0t=0, max, min, period
Example:
f(0)=kf(0)=k

Substitute points

How:
Put known points in the function
Example:
50a3=40050a^3=400

Simultaneous equations

How:
One equation per unknown
Example:
GDC solves up to three

Worked example

Find kk and aa for f(t)=katf(t)=ka^t through (0,50)(0,50) and (3,400)(3,400).

f(t)=katf(t)=ka^t passes through (0,12)(0,12). What is kk?

Testing and reflecting

Check the shape, the values and the domain against the data and the situation.

Test the model against the data and the context, and comment on whether it is appropriate and reasonable. Justify a choice with specific features, for example "the mass halves every 6 days, so an exponential model is appropriate".

If a model gives an unreasonable value, say which assumption fails: negative lengths, a population below zero or a volume above capacity.

  1. 1

    Shape

    does the curve pass close to the data and look the same?

  2. 2

    Values

    do the predictions make sense?

  3. 3

    Domain

    are the inputs sensible?

Testing a model

A model predicts a tank holding 500 litres when its capacity is 400. This shows...

Using the model

Interpolation is usually reliable; extrapolation can be very unreliable.

Use the model to read values, solve equations on the GDC and interpret answers in context with units. Interpolation (within the range of the data) is usually reliable. Extrapolation (outside it) can be very unreliable.

A quadratic P(t)=−0.03t2+1.5t+40P(t)=-0.03t^2+1.5t+40 fitted to a town's population from 2000 to 2020 predicts zero population at t=69.3t=69.3. That is not realistic for a growing town. A bacteria model N=500(1.4)tN=500(1.4)^t also gives impossible numbers for large tt, because food and space run out.

1020304050607020406080xy(25, 58.75)(69.3, 0)P = -0.03t² + 1.5t + 40
The quadratic model reaches zero population at about t = 69.3, far beyond the data (t = 0 to 20).

Data cover t=0t=0 to 2020. A prediction at t=70t=70 is...

Try an exam question

A tank is filled so that its volume is V(t)=40+25tV(t)=40+25t litres after tt minutes. The tank holds at most 400400 litres. Find the domain of the model and the time at which the tank is full.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

Which of the following is the most reasonable domain for the model?

1 mark, marked against the mark scheme

Revision notes