Resistance

Resistance Flashcards

Spec 4.2.4 · Cambridge IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

12 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 12 cards
State the equation for resistance.
R = V / I.
What unit is resistance measured in?
Ohms (Ω).
How is resistance measured experimentally?
Using a series-connected ammeter for current and a parallel-connected voltmeter for p.d., then calculating R = V/I.
How does resistance vary with the length of a metallic conductor?
Resistance is directly proportional to length — a longer wire has more resistance.
How does resistance vary with cross-sectional area?
Resistance is inversely proportional to cross-sectional area — a thicker wire has less resistance.
What does the I–V graph of a resistor of constant resistance look like?
A straight line through the origin.
What does the I–V graph of a filament lamp look like, and why?
A curve that flattens off, because the filament heats up and its resistance increases as current increases.
What does the I–V graph of a diode look like?
Current flows easily in one direction (forward bias) but almost not at all in the reverse direction.
How does p.d. across a conductor change as resistance increases, for a constant current?
The p.d. increases.
A resistor has 6 V across it and 3 A flowing through it. What is its resistance?
R = V/I = 6/3 = 2 Ω.
If a wire's length is doubled, what happens to its resistance?
It doubles.
If a wire's cross-sectional area is doubled, what happens to its resistance?
It halves.

Flashcards