Detection of Radioactivity

Detection of Radioactivity Flashcards

Spec 5.2.1 · Cambridge IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
What is meant by background radiation?
Background radiation is the constant, low-level ionising radiation that is present in the environment at all times. It exists naturally and is always present, forming a baseline level of radioactivity.
Name four sources that contribute to background radiation.
The four main sources of background radiation are: radon gas, rocks and buildings, food and drink, and cosmic rays.
What is radon gas and why is it a source of background radiation?
Radon gas is a radioactive noble gas released from uranium decay in rocks and soil. It seeps into buildings and decays, producing ionising radiation that contributes significantly to background radiation exposure.
How do rocks and buildings contribute to background radiation?
Rocks and building materials contain naturally occurring radioactive elements such as uranium and thorium. These elements undergo radioactive decay and emit ionising radiation into the surrounding environment.
Explain how food and drink contribute to background radiation.
Food and drink contain small amounts of naturally occurring radioactive isotopes, such as potassium-40 and carbon-14. When consumed, these isotopes enter the body and emit ionising radiation.
What are cosmic rays and how do they contribute to background radiation?
Cosmic rays are high-energy particles from space that constantly bombard Earth's atmosphere. They interact with atmospheric nuclei to produce secondary radiation that reaches Earth's surface, contributing to background radiation.
What equipment is used to measure ionising nuclear radiation?
Ionising nuclear radiation is measured using a detector (such as a Geiger-Müller tube) connected to a counter. The detector identifies radiation and the counter records the number of ionising events.
Define count rate and state the units in which it is measured.
Count rate is the number of ionising events detected per unit time. It is measured in counts per second (counts/s) or counts per minute (counts/minute or c.p.m.).
Why is it important to measure background radiation when detecting radioactivity?
Background radiation is always present and will be detected by the counter. Measuring it allows the actual count rate from a radioactive source to be determined by subtracting the background count rate from the total measured count rate.
How is corrected count rate calculated?
Corrected count rate = Total measured count rate − Background radiation count rate. This gives the count rate from the radioactive source only, removing the effect of background radiation.
A sample gives a total count rate of 320 counts/minute. The background radiation count rate is 40 counts/minute. Calculate the corrected count rate.
Corrected count rate = 320 − 40 = 280 counts/minute. This represents the count rate from the sample alone.
What is meant by an ionising detector?
An ionising detector is a device that responds to and detects ionising radiation by producing a measurable signal, such as an electrical pulse, when ionising particles or photons interact with it.
Why must background radiation measurements be taken in the same location as the radioactive source being investigated?
Background radiation levels vary depending on location due to differences in radon gas concentration, local geology, and altitude (affecting cosmic ray exposure). Measuring background radiation in the same location ensures an accurate correction.
State the SI unit for count rate.
The SI unit for count rate is counts per second (counts/s), also written as Bq (becquerels) when expressing the activity of a source.
Explain why a corrected count rate must be calculated rather than just using the total count rate from a measurement.
The total count rate includes both radiation from the source and background radiation. Without correction, the measured activity would be higher than the actual activity of the source, giving inaccurate results.

Flashcards