Series and Parallel Circuits Flashcards
Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.
13 cards
Tap a card to flip it. Swipe right if you knew it, left if not.
See all 13 cards
- What is true about the current at every point in a series circuit?
- It is the same everywhere, since there is only one path for current.
- How is total p.d. across a series circuit related to individual p.d.s?
- The total p.d. equals the sum of the individual p.d.s across each component.
- How do you find the combined e.m.f. of several sources in series?
- Add their individual e.m.f. values together.
- How do you find the combined resistance of resistors in series?
- Add their individual resistances together.
- How does the current from the source compare with the current in each branch of a parallel circuit?
- The source current is larger than the current in each individual branch.
- How does the combined resistance of two resistors in parallel compare with either resistor alone?
- It is less than the resistance of either resistor by itself.
- What is the p.d. across each branch of a parallel circuit?
- The same as the p.d. across the whole parallel arrangement.
- State the rule for current at a junction.
- The sum of the currents entering a junction equals the sum of the currents leaving it.
- Give one advantage of connecting lamps in parallel in a lighting circuit.
- Each lamp gets the full supply p.d., and if one lamp fails the others stay lit.
- Two resistors of 3 ohm and 5 ohm are connected in series. What is the combined resistance?
- 3 + 5 = 8 ohm.
- Two cells of 2 V each are connected in series in the same direction. What is the combined e.m.f.?
- 2 + 2 = 4 V.
- Two equal 8 ohm resistors are connected in parallel. What is the combined resistance?
- 4 ohm (half of one resistor's value).
- Why does adding a resistor in parallel always reduce total resistance?
- Because it provides an extra path for current, making it easier overall for charge to flow.