Power

Power Flashcards

Spec 1.7.4 · Cambridge IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
Define power.
Power is the rate at which work is done or the rate at which energy is transferred. It measures how quickly energy is being used or transferred.
State the equation for power in terms of work done.
P = W/t, where P is power (in watts, W), W is work done (in joules, J), and t is time (in seconds, s).
State the equation for power in terms of energy transferred.
P = ΔE/t, where P is power (in watts, W), ΔE is energy transferred (in joules, J), and t is time (in seconds, s).
What is the SI unit of power?
The watt (W), which is equivalent to joules per second (J/s) or 1 J/s = 1 W.
Calculate the power if 500 J of work is done in 25 seconds.
P = W/t = 500/25 = 20 W
A device transfers 3000 J of energy in 2 minutes. Calculate its power.
First convert time: 2 minutes = 120 seconds. Then P = ΔE/t = 3000/120 = 25 W
Explain what it means if one appliance has a higher power rating than another.
The appliance with higher power rating transfers energy at a faster rate, or does work more quickly. It uses more energy per unit time.
Rearrange P = W/t to find work done.
W = P × t, where work done equals power multiplied by time.
Rearrange P = ΔE/t to find time.
t = ΔE/P, where time equals energy transferred divided by power.
A motor has a power output of 150 W. How much work does it do in 8 seconds?
W = P × t = 150 × 8 = 1200 J
What is the difference between the two definitions of power (work-based and energy-based)?
Both definitions are equivalent. Work done is a form of energy transfer, so P = W/t and P = ΔE/t describe the same concept from different perspectives.
A light bulb rated at 60 W operates for 10 hours. Calculate the total energy transferred.
First convert time: 10 hours = 36,000 seconds. Then ΔE = P × t = 60 × 36,000 = 2,160,000 J (or 2.16 MJ)
If an object gains 400 J of kinetic energy in 5 seconds, what is the power involved?
P = ΔE/t = 400/5 = 80 W
Name the two equivalent equations used to calculate power.
P = W/t (power equals work done per unit time) and P = ΔE/t (power equals energy transferred per unit time).
A heater transfers 7200 J of thermal energy in 30 minutes. Calculate its power output.
First convert time: 30 minutes = 1800 seconds. Then P = ΔE/t = 7200/1800 = 4 W

Flashcards