Electrical Safety

Electrical Safety Flashcards

Spec 4.4 · Cambridge IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
What are the three wires in a mains circuit?
Live wire, neutral wire, and earth wire. The live wire carries the current to the appliance, the neutral wire completes the circuit, and the earth wire provides a safety path for current in case of a fault.
Why must a switch be connected to the live wire?
So that when the switch is turned off, the live wire is disconnected from the circuit. This ensures the circuit is switched off safely and no current can flow to the appliance.
State three hazards of damaged insulation.
Risk of electric shock if a person touches the exposed wire; risk of short circuits; risk of fire if the exposed wire comes into contact with flammable materials.
What is the hazard of overheating cables?
Overheating can damage the insulation around the cables, which may lead to short circuits, electric shock, or fire.
Why are damp conditions a hazard in electrical circuits?
Water is a good conductor of electricity. Damp conditions allow current to flow through the water, increasing the risk of electric shock to a person in contact with the water.
What is the hazard of excess current from overloading plugs and extension leads?
Excess current causes overheating of the cables and plugs, which can damage insulation, cause short circuits, and potentially start fires.
Define the purpose of a fuse in a mains circuit.
A fuse protects the circuit and cabling by breaking the circuit if the current exceeds a safe level. It contains a thin wire that melts when excess current flows through it, disconnecting the circuit.
Explain how a trip switch (circuit breaker) operates.
A trip switch automatically cuts off the current when it exceeds a preset level. It uses an electromagnet that activates when excess current flows, opening the switch and breaking the circuit. Unlike a fuse, it can be reset and reused.
Why must an appropriate fuse rating be chosen for an appliance?
The fuse rating must be slightly higher than the normal operating current of the appliance. If too high, it will not protect against faults; if too low, it will blow during normal use.
What does the outer casing of an electrical appliance need to be?
Either non-conducting (double-insulated) or earthed. This prevents a person from touching live parts inside the appliance and suffering electric shock.
Explain why double-insulated appliances do not need an earth wire.
Double-insulated appliances have two layers of insulation around live parts, preventing any contact with live components. Even if the outer insulation is damaged, the inner insulation still protects against shock, so an earth wire is not necessary.
Why is a fuse without an earth wire sufficient to protect a double-insulated appliance?
A fuse protects the circuit and cabling from excess current caused by a fault. Since double-insulated appliances have two layers of insulation, a person cannot be shocked directly. The fuse therefore only needs to protect the circuit itself, not provide a shock protection path.
What is the function of the earth wire in earthed appliances?
The earth wire provides a low-resistance path for current to flow safely into the ground if a fault occurs. This prevents a person from receiving a shock if they touch the outer casing of a faulty appliance.
Name two types of safety devices used in mains circuits.
Fuses and trip switches (circuit breakers). Both protect against excess current, but trip switches can be reset while fuses must be replaced once blown.
How does choosing an appropriate trip switch setting prevent hazards?
The trip switch setting must match the maximum safe current for the circuit. If current exceeds this level due to overloading or a fault, the switch trips and disconnects the circuit, preventing overheating and fire.

Flashcards