Refraction of Light Flashcards
Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.
15 cards
Tap a card to flip it. Swipe right if you knew it, left if not.
See all 15 cards
- Define the normal in the context of light refraction.
- The normal is an imaginary line drawn perpendicular (at 90°) to the surface at the point where light strikes it. It is used as a reference line to measure angles of incidence and refraction.
- Define angle of incidence and angle of refraction.
- The angle of incidence is the angle between the incident ray and the normal. The angle of refraction is the angle between the refracted ray and the normal. Both are measured from the normal, not the surface.
- What is refraction of light?
- Refraction is the change in direction of light as it travels from one medium to another due to a change in the speed of light between the two media.
- Describe how to carry out an experiment to show refraction of light using a transparent block.
- Direct a light ray at an angle onto a transparent block (e.g. glass or Perspex). Mark the incident ray and observe the refracted ray inside the block using pins or a pencil line. Measure the angles of incidence and refraction using a protractor from the normal. Repeat with different shaped blocks to show refraction occurs at curved surfaces too.
- What happens to light as it passes through a transparent material?
- Light travels in straight lines but changes direction (bends) at the surface due to a change in speed. Inside the material, light continues in a straight line but at a slower speed than in air/vacuum. It changes direction again when leaving the material back to air.
- Define refractive index (n).
- Refractive index is the ratio of the speed of light in a vacuum (or air) to the speed of light in a given medium. It is a dimensionless number always greater than 1 for materials denser than air.
- State and explain the equation relating refractive index to angles of incidence and refraction.
- n = sin i / sin r, where n is the refractive index, i is the angle of incidence and r is the angle of refraction. This is Snell's Law and shows that the refractive index equals the ratio of the sines of these angles.
- What is the critical angle?
- The critical angle is the angle of incidence (in the denser medium) at which the angle of refraction equals 90°. At this angle, the refracted ray travels along the surface of the boundary between the two media.
- Define total internal reflection.
- Total internal reflection occurs when light travels from a denser medium to a less dense medium at an angle of incidence greater than the critical angle. The light is completely reflected back into the denser medium and no refraction occurs.
- Give an everyday example of total internal reflection.
- Light sparkling or glinting inside a diamond. The high refractive index of diamond creates a small critical angle, so light entering the diamond undergoes total internal reflection internally, making it very bright and sparkly.
- State the equation relating refractive index to critical angle.
- n = 1 / sin c, where n is the refractive index and c is the critical angle. This equation shows that materials with higher refractive indices have smaller critical angles.
- What is internal reflection?
- Internal reflection is when light is reflected at the boundary between two media whilst travelling in the denser medium, but some light is still refracted into the less dense medium. It occurs when the angle of incidence is less than the critical angle.
- Describe the structure and function of an optical fibre.
- An optical fibre consists of a glass or plastic core surrounded by cladding with a lower refractive index. Light entering the core undergoes total internal reflection at the core-cladding boundary, allowing it to travel along the fibre with minimal loss, even around bends.
- Explain how optical fibres are used in telecommunications.
- Optical fibres carry data as pulses of light over long distances with minimal signal loss and high bandwidth. Light signals are converted from electrical signals, transmitted through the fibre via total internal reflection, and converted back to electrical signals at the receiver end.
- Why are optical fibres superior to copper wires for long-distance telecommunications?
- Optical fibres have much higher bandwidth, allowing more data to be transmitted; they experience less signal loss over long distances; they are immune to electromagnetic interference; and they are thinner and lighter, making them easier to install and more economical.