Sound

Sound Flashcards

Spec 3.4 · Cambridge IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
How is sound produced by a vibrating source?
Sound is produced when an object vibrates. The vibrations cause the surrounding medium to oscillate, creating sound waves that propagate outward from the source.
Describe the longitudinal nature of sound waves.
Sound waves are longitudinal waves in which particles of the medium vibrate parallel to the direction of wave propagation. The wave consists of alternating regions of compression and rarefaction.
What is the approximate range of frequencies audible to humans?
The human hearing range is approximately 20 Hz to 20 000 Hz (or 20 kHz).
Why is a medium necessary for sound wave transmission?
Sound waves require a medium (solid, liquid, or gas) to transmit because they rely on the vibration of particles in that medium. Sound cannot travel through a vacuum where there are no particles to vibrate.
State the approximate speed of sound in air.
The speed of sound in air is approximately 330–350 m/s (at room temperature and standard conditions).
Describe a method to determine the speed of sound in air using distance and time.
Measure the distance between a sound source and a reflective surface. Record the time for sound to travel to the surface and back. Calculate speed using: speed = distance travelled ÷ time taken. Use the total distance (twice the distance to the surface) divided by the total time to find the speed of sound.
How does amplitude affect sound?
Changes in amplitude affect the loudness of sound. A larger amplitude produces a louder sound; a smaller amplitude produces a quieter sound.
How does frequency affect sound?
Changes in frequency affect the pitch of sound. A higher frequency produces a higher pitch; a lower frequency produces a lower pitch.
Define an echo.
An echo is the reflection of sound waves off a surface. When sound waves bounce back from a hard surface and return to the listener, they are heard as a repeat of the original sound.
Define ultrasound.
Ultrasound is sound with a frequency higher than 20 kHz (20 000 Hz), which is above the upper limit of human hearing.
What are compression and rarefaction in a sound wave?
Compression is a region where particles of the medium are pushed closely together, resulting in increased pressure. Rarefaction is a region where particles are spread further apart, resulting in decreased pressure. These alternate along the length of a longitudinal sound wave.
Compare the speed of sound in solids, liquids, and gases.
In general, sound travels fastest in solids, slower in liquids, and slowest in gases. This is because particles are more tightly bound in solids, allowing sound vibrations to transfer more efficiently.
State three uses of ultrasound.
Three uses of ultrasound are: (1) non-destructive testing to detect defects in materials, (2) medical scanning of soft tissue using ultrasound imaging, and (3) sonar to detect objects and measure distance in water.
Explain how ultrasound is used in sonar to calculate depth.
Ultrasound waves are emitted and travel through water until they reflect off an object or the seabed. The time taken for the echo to return is recorded. The depth is calculated using: depth = (speed of sound × time taken) ÷ 2. The division by 2 accounts for the sound travelling to the object and back.
How is ultrasound used in medical scanning of soft tissue?
Ultrasound waves are transmitted into the body where they reflect off boundaries between different tissue types. These reflections are detected and converted into an image, allowing visualisation of soft tissues such as organs and a developing foetus without using ionising radiation.

Flashcards