Turning Effect of Forces

Turning Effect of Forces Flashcards

Spec 1.5.2 · Cambridge IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
Define the moment of a force.
The moment of a force is a measure of its turning effect about a pivot. It is a rotational force that causes objects to rotate or turn about a fixed point.
State the equation for calculating the moment of a force.
Moment = Force × Perpendicular distance from the pivot Or: M = F × d Where M is in newton-metres (N m), F is in newtons (N), and d is the perpendicular distance in metres (m).
Give three everyday examples of the turning effect of a force.
Opening a door using a handle (force applied far from the hinge pivot) Using a spanner to loosen a bolt (longer spanner gives greater turning effect) Using a see-saw or lever (pushing down at one end causes rotation about the centre pivot)
What is the perpendicular distance in the moment equation?
The perpendicular distance is the shortest distance from the pivot to the line of action of the force. It is measured at right angles (90°) to the force direction.
State the principle of moments.
For an object to be in equilibrium (not rotating), the sum of clockwise moments about a pivot must equal the sum of anticlockwise moments about that same pivot.
What conditions must be satisfied for an object to be in equilibrium?
There must be no resultant force (the object is not accelerating) There must be no resultant moment (the object is not rotating) Both conditions must be true for complete equilibrium.
Apply the principle of moments to a balanced beam with one force on each side of the pivot.
For a balanced beam: Force on left × Distance from pivot on left = Force on right × Distance from pivot on right Or: F₁ × d₁ = F₂ × d₂ The clockwise and anticlockwise moments are equal, so the beam does not rotate.
How would you use the principle of moments to find an unknown force on a balanced beam?
Rearrange the moment equation M = F × d to solve for the unknown: F = M ÷ d or d = M ÷ F Use the principle that clockwise moments = anticlockwise moments, then substitute known values.
Explain how to apply the principle of moments when there are more than two forces acting on an object.
Sum all clockwise moments and all anticlockwise moments separately. For equilibrium: Sum of clockwise moments = Sum of anticlockwise moments Calculate the moment for each force individually, then add them to find the total moment on each side of the pivot.
Describe an experiment to demonstrate that there is no resultant moment on an object in equilibrium.
Use a uniform beam or metre rule balanced on a pivot (fulcrum). Hang weights on each side of the pivot at different distances. Adjust the positions until the beam balances horizontally with no rotation. Measure the forces and perpendicular distances. Calculate the moments for each side. Verify that clockwise moments equal anticlockwise moments, proving no resultant moment acts on the balanced beam.
Why does increasing the perpendicular distance from the pivot increase the moment, even if the force stays the same?
Because moment = force × perpendicular distance. If the perpendicular distance increases while the force remains constant, the moment increases proportionally. This explains why it is easier to open a door by pushing at the handle (far from the hinge) than by pushing near the hinge.
What is the relationship between force, distance from pivot, and the ease of turning?
A larger moment is created by either a larger force or a greater perpendicular distance from the pivot. A larger moment makes turning easier. Therefore, applying a force far from the pivot, or applying a larger force closer to the pivot, both produce greater turning effects.
In a balanced system, what happens if you increase one force without changing the distance?
The moment on that side increases, creating an unbalanced resultant moment. The object will no longer be in equilibrium and will rotate in the direction of the larger moment. To re-balance, you must either decrease that force or reduce its perpendicular distance from the pivot.
Define what it means for an object to have 'no resultant moment'.
An object has no resultant moment when the sum of all clockwise moments about any pivot point equals the sum of all anticlockwise moments about that same point. This means the object will not rotate and is in rotational equilibrium.
What units are used for moment and why?
Moment is measured in newton-metres (N m) because it is calculated from force (newtons) multiplied by distance (metres). The N m unit shows both the magnitude of the force and the distance from the pivot, indicating the turning effect.

Flashcards