Pressure

Pressure Flashcards

Spec 1.8 · Cambridge IGCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
Define pressure.
Pressure is the force exerted per unit area. It is calculated as the force applied divided by the area over which the force acts.
What is the equation for pressure?
p = F/A, where p is pressure in pascals (Pa), F is force in newtons (N), and A is area in square metres (m²).
What happens to pressure if force increases whilst area remains constant?
Pressure increases. Since pressure is directly proportional to force, doubling the force doubles the pressure.
What happens to pressure if area increases whilst force remains constant?
Pressure decreases. Since pressure is inversely proportional to area, doubling the area halves the pressure.
Explain why a drawing pin has a sharp point and a flat head in terms of pressure.
The sharp point has a very small area, so the force applied to the flat head creates high pressure at the point, allowing it to pierce material easily. The flat head spreads the force over a larger area so pressure is low and it does not hurt the finger.
Explain why camels have large feet relative to their mass.
Large feet spread the camel's weight over a greater area, reducing the pressure exerted on the sand. This prevents the camel from sinking into soft desert sand.
Describe qualitatively how pressure changes with depth in a liquid.
Pressure increases with depth. The deeper you go beneath the surface of a liquid, the greater the pressure because there is more liquid above pressing down due to its weight.
How does the density of a liquid affect the pressure at a given depth?
Pressure increases with density. At the same depth, a denser liquid exerts greater pressure than a less dense liquid because it has more mass per unit volume.
What is the equation for pressure change with depth in a liquid?
Δp = ρgΔh, where Δp is the change in pressure in pascals (Pa), ρ is the density of the liquid in kilograms per cubic metre (kg/m³), g is gravitational field strength (9.8 m/s² on Earth), and Δh is the change in depth in metres (m).
Calculate the pressure change when descending 50 metres in seawater (density = 1025 kg/m³).
Using Δp = ρgΔh: Δp = 1025 × 9.8 × 50 = 502,250 Pa or approximately 502 kPa.
Why does pressure increase with depth in a liquid?
Pressure increases with depth because the weight of all the liquid above that point creates a force pressing downward. The greater the depth, the greater the weight of liquid above, and therefore the greater the pressure.
Give two everyday examples where understanding pressure variation with depth is important.
Submarine design (hulls must be strong enough to withstand high pressure at depth) and scuba diving (divers must ascend slowly to avoid the pressure change causing decompression sickness).
Why is pressure at the bottom of a container of fresh water different from the pressure at the bottom of an equally deep container of salt water?
Salt water has a greater density than fresh water. Therefore, at the same depth, salt water exerts greater pressure because Δp = ρgΔh and salt water has a larger ρ value.
What units are used for pressure in the pressure equation?
Pressure in pascals (Pa), force in newtons (N), and area in square metres (m²). Alternatively, pressure can be expressed in kilopascals (kPa) where 1 kPa = 1000 Pa.
Rearrange the pressure equation p = F/A to make F the subject.
F = p × A, or F = pA. Force equals pressure multiplied by area.

Flashcards