The AC Generator Flashcards
Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.
11 cards
Tap a card to flip it. Swipe right if you knew it, left if not.
See all 11 cards
- What causes electromagnetic induction?
- A conductor moving across a magnetic field, or a changing magnetic field linking with a conductor.
- How can electromagnetic induction be demonstrated experimentally?
- By moving a magnet in and out of a coil connected to a galvanometer and observing a deflection.
- Name three factors that increase the size of an induced e.m.f.
- Faster relative motion, a stronger magnetic field, and more turns on the coil.
- What determines the direction of an induced e.m.f.?
- It always opposes the change that is causing it.
- What does a simple a.c. generator consist of?
- A coil rotating in a magnetic field (or a magnet rotating inside a fixed coil).
- What connects the rotating coil of an a.c. generator to the external circuit?
- Slip rings and brushes.
- Why does an a.c. generator produce alternating current?
- Because the coil's orientation relative to the field reverses every half-turn, so the induced e.m.f. reverses direction too.
- When is the e.m.f. of an a.c. generator zero?
- When the coil is moving parallel to the magnetic field, cutting no field lines.
- When is the e.m.f. of an a.c. generator at its peak?
- When the coil is perpendicular to the magnetic field, cutting field lines fastest.
- How many cycles of the e.m.f.-time graph occur per full rotation of the coil?
- One complete cycle.
- What is the key difference between slip rings and a split-ring commutator?
- Slip rings maintain continuous connection for a.c. output; a split-ring commutator reverses connections each half-turn to give d.c. output.