Hazards and Uses of Radioactivity

Hazards and Uses of Radioactivity Flashcards

Spec 4.4.2.4–4.4.3.3 · AQA GCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
Define ionising radiation and explain why alpha, beta, and gamma radiation are all classified as ionising.
Ionising radiation is radiation with enough energy to remove electrons from atoms, creating ions. Alpha particles (helium nuclei) ionise through direct collision with electrons. Beta particles (electrons) ionise by interacting with atomic electrons. Gamma rays (electromagnetic radiation) ionise by transferring energy to electrons in atoms.
Describe the hazards associated with alpha radiation exposure.
Alpha particles have low penetrating power and cannot penetrate skin. However, if alpha-emitting sources are inhaled or ingested, they cause severe damage to internal tissues due to their high ionising power. This results in cell damage and potential cancer development in lungs or digestive organs.
Describe the hazards associated with beta radiation exposure.
Beta particles can penetrate skin and reach living cells beneath the surface, causing damage. They have moderate ionising power and penetrating power. Exposure causes cell damage and increased cancer risk. If beta-emitting sources are ingested or inhaled, they cause internal damage similar to alpha sources.
Describe the hazards associated with gamma radiation exposure.
Gamma rays have high penetrating power and pass through skin and tissue, reaching internal organs. They have low ionising power but can cause significant damage to cells deep within the body. Exposure increases the risk of cancer and can cause acute radiation sickness at high doses.
Name three safety measures when working with radioactive sources in a laboratory.
Three safety measures are: (1) Use lead shielding or lead-lined containers to reduce exposure, particularly for gamma sources; (2) Use tongs or forceps to handle sources, keeping them at arm's length away from the body; (3) Limit time spent near radioactive sources; (4) Wear protective clothing such as lab coats; (5) Store sources in secure, labelled containers away from the workplace.
Explain why medical tracers are typically gamma-emitting isotopes with short half-lives.
Gamma rays are used because they can penetrate body tissues and be detected outside the body using a gamma camera, allowing imaging of organs and tissues. Short half-lives are chosen because the isotope decays quickly, reducing the radiation dose to the patient while still allowing sufficient time for imaging. This minimises harm to healthy tissue.
Describe how radioactive isotopes are used in cancer treatment.
Beta or gamma-emitting isotopes are targeted at cancer cells, either through external beam radiation therapy or by introducing radioactive sources directly into or near tumours (brachytherapy). The high ionising power of the radiation damages cancer cell DNA, causing cell death. The isotope is chosen so most radiation is absorbed by cancer cells, minimising damage to surrounding healthy tissue.
Explain why cobalt-60, a gamma emitter with a half-life of 5.3 years, is suitable for sterilisation of medical equipment.
Cobalt-60 is suitable because gamma rays have high penetrating power and can reach all parts of packaged equipment without opening it. The half-life of 5.3 years is appropriate because the source remains effective for extended periods in industrial use whilst decaying gradually. Gamma radiation effectively kills microorganisms and pathogens without leaving radioactive residue on equipment.
Describe the use of radioactive isotopes in smoke detectors and explain the choice of isotope.
Americium-241, an alpha emitter, is used in smoke detectors. It ionises air between two plates, creating a small electrical current. When smoke particles enter, they absorb alpha particles, reducing the current and triggering an alarm. Alpha-241 is chosen because its alpha radiation is blocked by a thin material so it doesn't escape, and its half-life of 432 years ensures long-term reliability.
Describe how industrial thickness gauges use radioactive isotopes.
A radioactive source (typically a beta or gamma emitter) is placed on one side of material being measured, with a detector on the other side. As material thickness increases, less radiation reaches the detector. The change in detected radiation indicates material thickness. Beta sources are often used because their penetrating power is intermediate—sufficient to pass through material but varied enough to provide meaningful measurements.
Explain why iodine-131, a beta emitter with a half-life of 8 days, is suitable as a medical tracer for thyroid disorders.
Iodine-131 is suitable because the thyroid gland naturally absorbs and concentrates iodine, allowing targeted imaging of thyroid function without requiring external gamma detection. The 8-day half-life is appropriate because it provides enough time for the thyroid to concentrate the isotope and for imaging to occur, whilst the relatively short half-life minimises radiation exposure to the patient. Beta emission allows some external detection if needed.
Define irradiation and explain its distinction from contamination.
Irradiation is exposure to radiation from an external source, causing damage to living cells but not making the organism radioactive. Contamination is when radioactive material physically enters the body or contacts skin, continuing to emit radiation internally or on surfaces. Irradiation effects cease when the source is removed; contamination is more dangerous as the source remains with the living tissue.
Explain the effects of radiation on living tissue at cellular level.
Radiation ionises atoms in cells, disrupting chemical bonds and creating free radicals that damage DNA, proteins, and cell membranes. This can cause cell death, mutations, or uncontrolled growth (cancer). High doses cause immediate cell death and acute radiation sickness; lower doses increase long-term cancer risk and genetic damage that may affect future generations.
Explain why plutonium-238, an alpha emitter with a half-life of 88 years, is used in space probes rather than solar panels.
Plutonium-238's long half-life of 88 years means it remains reliable as an energy source for the entire duration of extended space missions where solar panels are impractical (e.g., far from the Sun or in shadowed regions). The alpha radiation is easily shielded and poses no external hazard in the vacuum of space. The high energy density per unit mass is essential for powering spacecraft far from Earth.
Name the type of radiation most commonly used in medical imaging and justify your choice.
Gamma radiation is most commonly used in medical imaging (e.g., PET and SPECT scans). It is justified because gamma rays can penetrate body tissues and be detected outside the body using gamma cameras, providing clear internal images. Gamma-emitting isotopes with short half-lives deliver diagnostic information whilst minimising radiation dose to the patient.

Flashcards