Pressure Flashcards
Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.
15 cards
Tap a card to flip it. Swipe right if you knew it, left if not.
See all 15 cards
- What is the equation for calculating pressure on a solid surface?
- P = F/A, where P is pressure in pascals (Pa), F is force in newtons (N), and A is area in square metres (m²).
- Define pressure.
- Pressure is the force acting perpendicular to a surface per unit area. It is measured in pascals (Pa) or N/m².
- State the equation for calculating pressure at a depth in a liquid.
- P = hρg, where P is pressure in pascals (Pa), h is depth in metres (m), ρ is density in kg/m³, and g is gravitational field strength in N/kg.
- Explain why pressure in a liquid increases with depth.
- As depth increases, there is a greater mass of liquid above that point. This greater mass creates a larger weight, which exerts more force on the area below, increasing the pressure.
- What is upthrust?
- Upthrust (or buoyancy) is the upward force exerted by a fluid on an object immersed in it. It occurs due to pressure differences between the bottom and top surfaces of the object.
- Explain how pressure differences cause upthrust.
- Pressure increases with depth in a fluid. The pressure acting upwards on the bottom surface of an object is greater than the pressure acting downwards on the top surface. This difference in pressure creates a net upward force called upthrust.
- Explain the conditions for an object to float in terms of pressure.
- An object floats when the upthrust equals its weight. The upward pressure forces balance the downward weight of the object, resulting in zero net force and equilibrium.
- State the equation used in hydraulic systems to explain pressure transmission.
- F₁/A₁ = F₂/A₂, where F₁ and F₂ are forces and A₁ and A₂ are areas. Pressure is transmitted equally throughout an incompressible fluid in a closed system.
- Explain how hydraulic systems use pressure transmission to create a mechanical advantage.
- In a hydraulic system, if a small force is applied to a small area, it creates pressure that is transmitted equally to a larger area. This produces a larger output force, providing a mechanical advantage. The relationship is: F₂ = F₁ × (A₂/A₁).
- What is atmospheric pressure?
- Atmospheric pressure is the force exerted by the weight of the atmosphere above a surface per unit area. At sea level, it is approximately 101,000 Pa (or 101 kPa).
- Explain how atmospheric pressure changes with altitude.
- Atmospheric pressure decreases with increasing altitude. As altitude increases, there is less atmosphere above that point, resulting in less weight of air and therefore lower pressure.
- Name the SI unit of pressure and give an alternative unit.
- The SI unit is the pascal (Pa), also expressed as N/m². Another common unit is the kilopascal (kPa), where 1 kPa = 1000 Pa.
- Calculate the pressure exerted by a force of 500 N on an area of 0.25 m².
- Using P = F/A: P = 500 ÷ 0.25 = 2000 Pa (or 2 kPa).
- Calculate the pressure at a depth of 10 m in water. Use ρ = 1000 kg/m³ and g = 10 N/kg.
- Using P = hρg: P = 10 × 1000 × 10 = 100,000 Pa (or 100 kPa).
- In a hydraulic system, a small piston of area 0.01 m² is pushed with a force of 100 N. What force is produced on a large piston of area 0.1 m²?
- Using F₁/A₁ = F₂/A₂: 100/0.01 = F₂/0.1. Therefore, F₂ = (100 × 0.1) ÷ 0.01 = 1000 N.