Stopping Distances and Safety

Stopping Distances and Safety Flashcards

Spec 4.5.6.3 · AQA GCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
Define thinking distance.
Thinking distance is the distance a vehicle travels during the driver's reaction time, before the brakes are applied. It is the distance covered between identifying a hazard and applying the brakes.
Define braking distance.
Braking distance is the distance a vehicle travels from the moment the brakes are applied until the vehicle comes to a complete stop.
Define stopping distance.
Stopping distance is the total distance travelled by a vehicle from when a hazard is identified until the vehicle comes to a complete stop. It equals thinking distance plus braking distance.
What is the equation that shows the relationship between stopping distance, thinking distance, and braking distance?
Stopping distance = thinking distance + braking distance
Name two factors that affect thinking distance.
Reaction time of the driver (affected by tiredness, drugs, alcohol, distractions) Speed of the vehicle (at higher speeds, the vehicle travels further during the reaction time)
Name four factors that affect braking distance.
Speed of the vehicle Road conditions (wet or icy roads increase braking distance) Condition of the vehicle (worn tyres or brakes increase braking distance) Mass of the vehicle (heavier vehicles require greater braking distance)
Explain how speed affects braking distance using the relationship with velocity.
Braking distance is proportional to the square of velocity (v²). This means if velocity doubles, braking distance increases by a factor of four. This is because the kinetic energy of the vehicle (which equals ½mv²) must be dissipated by the brakes.
Why does a wet road increase braking distance?
A wet road reduces the friction between the tyres and the road surface, meaning a smaller frictional force acts on the vehicle. Since braking distance is inversely proportional to the frictional force, less friction results in a greater braking distance.
Why does vehicle mass affect braking distance?
Heavier vehicles have greater kinetic energy (½mv²), so more work must be done by the brakes to bring them to a stop. A greater braking distance is needed to dissipate this larger kinetic energy.
Explain why worn tyres increase braking distance.
Worn tyres have reduced grip on the road surface, resulting in less friction between the tyres and road. This means the frictional force available for braking is smaller, so the vehicle decelerates more slowly and requires a greater distance to stop.
Why can large decelerations be dangerous?
Large decelerations produce large forces on the vehicle and passengers. These forces can cause injury to occupants, damage to the vehicle, or loss of vehicle control. Very high decelerations may cause the wheels to skid or the vehicle to flip, especially on curved roads.
Using F = ma, calculate the force produced when a 1000 kg car decelerates at 10 m/s².
F = ma F = 1000 × 10 F = 10,000 N A deceleration of 10 m/s² produces a force of 10,000 N (or 10 kN).
If a car's speed increases from 20 m/s to 40 m/s, by what factor does the braking distance increase?
Since braking distance is proportional to v², the braking distance increases by a factor of (40/20)² = 2² = 4. The braking distance becomes 4 times greater.
Explain how reaction time affects stopping distance at different speeds.
Reaction time is constant for a driver, but the distance travelled during reaction time increases with speed. At higher speeds, the vehicle travels further during the reaction time before brakes are applied. Therefore, total stopping distance increases significantly with speed because both thinking distance and braking distance increase.
Why should drivers increase their stopping distance in wet conditions?
In wet conditions, the friction between tyres and road is reduced, increasing braking distance. Additionally, reaction time may need to be longer as hazards are harder to identify. Therefore, a greater overall stopping distance is required to maintain road safety.

Flashcards