Domestic Electricity Flashcards
Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.
15 cards
Tap a card to flip it. Swipe right if you knew it, left if not.
See all 15 cards
- What is the difference between direct current (DC) and alternating current (AC)?
- Direct current (DC) flows in one direction only, whereas alternating current (AC) flows back and forth, changing direction periodically.
- State the frequency of UK mains electricity.
- The frequency of UK mains electricity is 50 Hz (hertz).
- State the peak voltage of UK mains electricity.
- The peak voltage of UK mains electricity is approximately 230 V (volts).
- Describe the function of the live wire in a three-pin plug.
- The live wire carries the alternating potential difference from the power supply to the appliance. It is coloured brown.
- Describe the function of the neutral wire in a three-pin plug.
- The neutral wire completes the circuit and carries the current away from the appliance back to the power supply. It is coloured blue.
- Describe the function of the earth wire in a three-pin plug.
- The earth wire provides a safe path for electric current to flow to the ground if there is a fault, preventing electric shock. It is coloured green and yellow striped.
- Explain the function of a fuse in a domestic circuit.
- A fuse contains a thin wire that melts and breaks the circuit if the current exceeds a safe level, preventing damage to the appliance and reducing the risk of fire.
- Explain the function of a circuit breaker in a domestic circuit.
- A circuit breaker automatically switches off the circuit if the current becomes too large, providing the same protection as a fuse but can be reset without replacement.
- Explain how the earth wire and fuse together protect users and appliances.
- If a fault causes the live wire to touch the metal casing, the earth wire provides a low-resistance path to ground, allowing a large current to flow. This triggers the fuse to melt and break the circuit before dangerous voltages can harm the user or damage the appliance.
- State the formula used to calculate the appropriate fuse rating for an appliance.
- P = VI, where P is power in watts (W), V is voltage in volts (V), and I is current in amperes (A). Rearranging: I = P ÷ V. The fuse rating must be the next standard rating above the calculated current.
- Calculate the appropriate fuse rating for an appliance with a power rating of 920 W used on a 230 V supply.
- I = P ÷ V = 920 ÷ 230 = 4 A. The appropriate fuse rating would be 5 A (the next standard rating above 4 A).
- Describe the dangers of a damaged or frayed cable.
- A damaged or frayed cable exposes the live wire, creating a risk of electric shock if touched. It may also cause short circuits, leading to overheating, fire risk, and damage to the appliance.
- Explain why damp conditions are dangerous in domestic electricity.
- Water is a good conductor of electricity. Damp conditions reduce the resistance of the human body and any insulators, greatly increasing the risk of electric shock if contact is made with live electrical equipment.
- Why is it important that the fuse rating is never exceeded?
- If a fuse rating is exceeded, it will not melt at the correct current level, allowing excessive current to flow. This can cause overheating of cables, damage to appliances, and increased fire risk.
- Name the type of current supplied by UK mains electricity.
- UK mains electricity supplies alternating current (AC).