Moments, Levers and Gears

Moments, Levers and Gears Flashcards

Spec 4.5.4 · AQA GCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
Define the moment of a force.
The moment of a force is the turning effect of a force about a pivot or fulcrum. It measures how effectively a force causes rotation.
State the equation for calculating the moment of a force.
M = Fd, where M is the moment (in newton-metres, Nm), F is the force (in newtons, N), and d is the perpendicular distance from the pivot to the line of action of the force (in metres, m).
What is the unit for moment?
Newton-metres (Nm)
Define the principle of moments.
For a system in rotational equilibrium, the sum of clockwise moments about a pivot equals the sum of anticlockwise moments about the same pivot.
What is the condition for a balanced system using the principle of moments?
Clockwise moment = Anticlockwise moment, or the net moment about the pivot is zero.
What is a lever?
A lever is a simple machine consisting of a rigid bar that rotates about a fixed point (pivot or fulcrum) to move or lift a load using an applied force (effort).
Explain how levers act as force multipliers.
Levers increase the size of a force by having a large distance between the pivot and the effort, compared to the distance between the pivot and the load. This allows a small effort force to move a larger load force.
Name the three classes of levers and give one example of each.
Class 1: Pivot between effort and load (e.g. seesaw, claw hammer). Class 2: Load between pivot and effort (e.g. wheelbarrow, bottle opener). Class 3: Effort between pivot and load (e.g. tweezers, fishing rod).
What is the mechanical advantage of a lever?
Mechanical advantage is the ratio of the load force to the effort force. For a lever, it can be calculated as the distance from the pivot to the effort divided by the distance from the pivot to the load.
What is a gear?
A gear is a rotating wheel with teeth that meshes with another gear to transmit motion and force between shafts.
Explain how gears transmit forces.
Gears transmit forces through the contact between their teeth. The driving gear pushes the teeth of the driven gear, causing it to rotate and transmit rotational motion and force.
How do gears change the size of a force?
The gear ratio determines how the force changes. A larger driving gear or smaller driven gear increases the force; conversely, a smaller driving gear or larger driven gear decreases the force.
How do gears change the direction of a force or rotation?
When two gears mesh together, they rotate in opposite directions. If more gears are added in sequence, they can reverse the direction again. Gears on perpendicular shafts (using bevel gears) can change the direction of rotation.
Define gear ratio.
Gear ratio is the ratio of the number of teeth on the driven gear to the number of teeth on the driving gear. It determines the relationship between rotational speed and force between two gears.
What happens to the rotational speed when using a large gear to drive a small gear?
The rotational speed of the small (driven) gear increases. It rotates faster than the driving gear, but with less force transmitted.

Flashcards