Electrical Power and Energy

Electrical Power and Energy Flashcards

Spec 4.2.4 · AQA GCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

12 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 12 cards
State the two equations for electrical power.
P = VI and P = I²R
State the two equations for energy transferred by an electrical appliance.
E = Pt and E = QV
Calculate the power of a component with a current of 3 A and resistance of 4 Ω.
P = I²R = 3² × 4 = 36 W
What energy transfer takes place in an electric kettle?
Electrical energy is transferred to thermal energy in the water.
What is the function of a step-up transformer in the National Grid?
It increases the voltage (decreasing the current) for efficient transmission.
What is the function of a step-down transformer?
It decreases the voltage to safe levels for use in homes and businesses.
Why does transmitting electricity at high voltage reduce energy losses?
A higher voltage means a lower current for the same power, and power loss (I²R) depends on current squared, so losses are much smaller.
A 100 W lamp is left on for 60 seconds. How much energy does it transfer?
E = Pt = 100 × 60 = 6000 J
Why is some of the electrical energy supplied to an appliance always wasted?
Resistance in components and wires converts some energy into unwanted thermal energy.
Give the equation linking energy, charge and potential difference.
E = QV
Why is the National Grid described as an efficient way to transfer energy?
Because high-voltage transmission keeps current low, minimising power losses due to resistance in the cables.
A device has power 60 W and current 2 A. Find its potential difference.
P = VI, so V = P/I = 60/2 = 30 V

Flashcards