Sound Waves Flashcards
Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.
15 cards
Tap a card to flip it. Swipe right if you knew it, left if not.
See all 15 cards
- What type of wave is sound and what does this mean?
- Sound is a longitudinal wave. This means the particles of the medium vibrate parallel (along the same direction) to the direction of energy transfer, creating compressions and rarefactions.
- Why does sound require a medium to travel?
- Sound requires a medium (such as air, water or solids) because the particles of the medium must vibrate to transfer the sound energy. Without a medium, there are no particles to vibrate, so sound cannot propagate.
- Describe how the human ear detects sound.
- Sound enters the ear canal and causes the eardrum to vibrate. These vibrations are transmitted through the small bones in the middle ear (ossicles), then to the cochlea in the inner ear. The cochlea converts these vibrations into electrical signals that the auditory nerve sends to the brain.
- Describe how a microphone detects sound.
- A microphone contains a diaphragm that vibrates when sound waves strike it. The vibrations of the diaphragm cause changes in a magnetic field or pressure on a piezoelectric crystal, which are converted into electrical signals.
- What is the relationship between loudness and amplitude?
- Loudness is directly related to the amplitude of the sound wave. The greater the amplitude, the louder the sound. A larger amplitude means the particles vibrate more vigorously, transferring more energy.
- What is the relationship between pitch and frequency?
- Pitch is directly related to the frequency of the sound wave. Higher frequency sound waves produce a higher pitch, whilst lower frequency sound waves produce a lower pitch.
- State the range of human hearing.
- The human ear can detect sounds with frequencies approximately between 20 Hz and 20 kHz (20,000 Hz).
- What is ultrasound?
- Ultrasound is sound with a frequency greater than 20 kHz (above the upper limit of human hearing). It cannot be detected by the human ear but can be produced and detected by specialised equipment.
- Name two applications of ultrasound.
- Two applications of ultrasound are: (1) pre-natal scanning to image a fetus in the womb, and (2) sonar to detect underwater objects and measure water depth.
- Explain how ultrasound is used in pre-natal scanning.
- Ultrasound waves are directed into the womb. They reflect off the fetus and are detected by a receiver. The reflected waves are processed to create an image of the fetus on a screen. Ultrasound is safe because it is non-ionising radiation.
- Explain how sonar works.
- A sonar device emits ultrasound waves into water. The waves reflect off underwater objects or the sea bed and return to the device. By measuring the time taken for the waves to return, the distance to the object can be calculated using the speed of sound in water.
- State the equation used for echo calculations.
- d = vt, where d is distance travelled (in metres), v is the velocity of the wave (in m/s), and t is the time taken (in seconds).
- How is the equation d = vt used for echo calculations?
- For an echo, the sound travels to a surface and reflects back, so the total distance travelled is twice the distance to the surface. Therefore: distance to surface = (v × t) ÷ 2, where t is the total time for the echo to return.
- Why does sound travel at different speeds in different media?
- The speed of sound depends on the density and elasticity of the medium. Sound travels faster through denser media (such as solids and liquids) because the particles are more tightly packed and can transfer vibrations more efficiently than through gases like air.
- What is the approximate speed of sound in air at room temperature?
- The speed of sound in air at room temperature is approximately 330 m/s (or 343 m/s at 20°C). This value may be provided in the exam or you should know it is roughly 330-340 m/s.