Energy Efficiency

Energy Efficiency Flashcards

Spec 4.1.2.2 · AQA GCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

11 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 11 cards
State the equation for efficiency.
efficiency = useful output energy transfer / total input energy transfer
Can efficiency be given as a percentage?
Yes - efficiency may be expressed as a decimal or a percentage.
A motor is supplied with 200 J and outputs 150 J of useful kinetic energy. Calculate its efficiency.
150/200 = 0.75 (75%)
Why can no real machine be 100% efficient?
Some energy is always wasted, usually as thermal energy, to the surroundings.
Name two ways to reduce unwanted energy transfers.
Lubrication (reduces friction) and thermal insulation (reduces heat loss).
How does lubrication improve efficiency?
It reduces friction between moving surfaces, so less energy is wasted as heat.
How does thermal insulation improve efficiency in a building?
It reduces the rate of thermal energy transfer out of the building, so less useful heat is wasted.
(HT) Give one way to increase the efficiency of an intended energy transfer.
Reduce friction (e.g. lubrication) or improve insulation to cut unwanted heat loss.
If a calculation gives an efficiency greater than 1, what has likely gone wrong?
The input and output energy values have probably been swapped, or an error made in the calculation.
A device transfers 40 J usefully out of 80 J supplied. What is its efficiency as a percentage?
40/80 = 0.5 = 50%
Why is wasted energy usually thermal energy?
Friction and resistance in most systems convert some of the input energy into heat that dissipates to the surroundings.

Flashcards