Electromagnetic Induction and Generators Flashcards
Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.
14 cards
Tap a card to flip it. Swipe right if you knew it, left if not.
See all 14 cards
- What is the generator effect?
- A potential difference is induced across a conductor when it moves relative to a magnetic field, or when the field around it changes.
- What is needed for a current (not just a potential difference) to be induced?
- The conductor must be part of a complete circuit.
- Name three factors that increase the size of an induced potential difference.
- Moving the conductor faster, using a stronger magnetic field, or increasing the number of turns on a coil.
- What does Lenz's law state (in principle)?
- An induced current always flows in a direction that opposes the change producing it.
- What type of current does an alternator produce, and how?
- Alternating current (ac), using slip rings so the current direction reverses every half turn.
- What type of current does a dynamo produce, and how?
- Direct current (dc), using a split-ring commutator to keep the output current in one direction.
- How does a moving-coil microphone work?
- Sound waves vibrate a diaphragm and attached coil in a magnetic field; the movement induces a varying current (generator effect).
- What are the two coils in a basic transformer wound on?
- A shared iron core.
- Why does a transformer only work with alternating current?
- Only an alternating current produces a continuously changing magnetic field, which is needed to induce a current in the secondary coil.
- State the transformer equation relating potential difference and number of turns.
- Vp/Vs = np/ns.
- State the transformer equation for a 100% efficient transformer.
- Vs × Is = Vp × Ip.
- Why does the National Grid transmit electricity at high voltage?
- High voltage allows a lower current for the same power, which reduces energy losses from heating in the cables.
- What is the role of a step-down transformer in the National Grid?
- To reduce the potential difference to safe levels before it reaches homes and businesses.
- What is the role of a step-up transformer in the National Grid?
- To increase the potential difference for efficient transmission along power lines.