Forces and Elasticity

Forces and Elasticity Flashcards

Spec 4.5.3 · AQA GCSE Physics: Flashcards

Studying this course? Keep your progress in one place.

Flip each card. Be honest: the ones you mark Not yet come back first.

15 cards

Tap a card to flip it. Swipe right if you knew it, left if not.

See all 15 cards
What is elastic deformation?
Elastic deformation is when a material returns to its original shape and size after the force causing it is removed. The material is not permanently changed.
What is inelastic deformation?
Inelastic deformation is when a material does not return to its original shape and size after the force causing it is removed. The material is permanently changed.
State Hooke's Law.
Hooke's Law states that the extension of a spring is directly proportional to the force applied to it, provided the limit of proportionality is not exceeded.
Write the equation for Hooke's Law and identify each term.
F = ke, where F is the force applied (in N), k is the spring constant (in N/m), and e is the extension (in m).
How do you determine the spring constant from a force–extension graph?
The spring constant is the gradient of the force–extension graph. Calculate it by dividing the change in force by the change in extension: k = ΔF / Δe.
Describe an experiment to investigate the relationship between force and extension of a spring.
Hang a spring vertically. Attach weights of increasing mass to the spring. Measure the extension for each mass added. Record force (using F = mg) and extension. Plot a force–extension graph to determine if the relationship is linear.
What is the limit of proportionality on a force–extension graph?
The limit of proportionality is the point on the graph beyond which the extension is no longer directly proportional to the force. Beyond this point, Hooke's Law no longer applies.
Explain the significance of the limit of proportionality.
The limit of proportionality shows the maximum force that can be applied whilst maintaining a linear relationship between force and extension. Beyond this point, the material begins to deform inelastically and may not return to its original length.
What happens to a spring when the force exceeds the limit of proportionality?
When the force exceeds the limit of proportionality, the spring undergoes inelastic deformation and no longer obeys Hooke's Law. The extension increases more rapidly with force, and the spring may not return to its original length.
Define the elastic potential energy stored in a spring.
Elastic potential energy is the energy stored in a spring when it is stretched or compressed. This energy is released when the spring returns to its original shape.
Write the equation for elastic potential energy and identify each term.
Ee = ½ke², where Ee is the elastic potential energy (in J), k is the spring constant (in N/m), and e is the extension (in m).
A spring has a spring constant of 200 N/m and is extended by 0.05 m. Calculate the elastic potential energy stored.
Using Ee = ½ke²: Ee = ½ × 200 × (0.05)² = ½ × 200 × 0.0025 = 0.25 J.
Calculate the force needed to extend a spring with spring constant 150 N/m by 0.08 m.
Using F = ke: F = 150 × 0.08 = 12 N.
A spring is stretched and then released. Why does it return to its original shape if it is within the elastic limit?
Within the elastic limit, the deformation is elastic, meaning the material has the ability to store elastic potential energy and return to its original shape when the applied force is removed.
Explain why the gradient of a force–extension graph equals the spring constant.
Gradient = ΔF / Δe. From Hooke's Law, F = ke, so the gradient equals k. This is because for any change in extension, the proportional change in force divided by extension gives the spring constant.

Flashcards