Horizontal circular motion

Horizontal circular motion

Spec 1.1 · Edexcel A-Level Further Maths: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • Angular speed ω=dθdt\omega=\frac{d\theta}{dt} (rad s−1^{-1}); linear speed v=rωv=r\omega; period T=2πωT=\frac{2\pi}{\omega}.
  • The acceleration is towards the centre: a=rω2=v2ra=r\omega^2=\frac{v^2}{r}.
  • The resultant force towards the centre is mv2r\frac{mv^2}{r}. It is not an extra force: mark only real forces.
  • A conical pendulum has r=lsin⁡θr=l\sin\theta, Tcos⁡θ=mgT\cos\theta=mg and ω2=glcos⁡θ\omega^2=\frac{g}{l\cos\theta}.
  • On a smooth bank, tan⁡θ=v2rg\tan\theta=\frac{v^2}{rg}; with an elastic string the radius is l+xl+x.

Angular speed and linear speed

Linear speed is radius times angular speed, with ω\omega in radians per second.

A particle moving in a circle of radius rr turns through an angle θ\theta (in radians) in time tt. Its angular speed is ω=dθdt\omega=\frac{d\theta}{dt}. For uniform circular motion ω\omega is constant.

The arc length is rθr\theta, so v=rωv=r\omega. One revolution is 2π2\pi radians, so the period is T=2πω=2πrvT=\frac{2\pi}{\omega}=\frac{2\pi r}{v}. To convert rev min−1^{-1} to rad s−1^{-1} multiply by 2π60\frac{2\pi}{60}: 120 rev min−1^{-1} is 4π4\pi rad s−1^{-1}.

θOAB
A particle turns through angle θ on a circle of radius r.
  • Linear speedv=rωv=r\omega
  • PeriodT=2πωT=\dfrac{2\pi}{\omega}

Worked example

A particle moves at ω=6\omega=6 rad s−1^{-1} on a circle of radius 0.50.5 m. Find its speed and period.

A particle moves on a circle of radius 0.30.3 m with ω=10\omega=10 rad s−1^{-1}. What is its speed?

Radial acceleration and resultant force

Even at constant speed the velocity changes direction, so there is an acceleration towards the centre.

The acceleration is directed towards the centre (radial) with magnitude a=rω2=v2ra=r\omega^2=\frac{v^2}{r}. Use rω2r\omega^2 when ω\omega is given and v2r\frac{v^2}{r} when the speed is given.

By Newton's second law the resultant force towards the centre is mv2r=mrω2\frac{mv^2}{r}=mr\omega^2. This is not an extra force: it is the resultant of the real forces (tension, reaction, friction, weight components) in the radial direction.

  • Accelerationa=rω2=v2ra=r\omega^2=\dfrac{v^2}{r}
  • Resultant forceF=mv2rF=\dfrac{mv^2}{r} (towards the centre)

Worked example

A 0.40.4 kg particle moves with r=0.5r=0.5 m and ω=6\omega=6 rad s−1^{-1}. Find its acceleration and the resultant force.

A 22 kg particle moves at 33 m s−1^{-1} on a circle of radius 0.50.5 m. What resultant force acts towards the centre?

The conical pendulum

Tension and weight are the only forces: the vertical components balance and the horizontal component gives the circular motion.

A particle on a string of length ll moves in a horizontal circle, the string making a constant angle θ\theta with the vertical. The radius is r=lsin⁡θr=l\sin\theta, not ll. Only the tension TT and the weight act.

Vertically (no acceleration): Tcos⁡θ=mgT\cos\theta=mg. Horizontally (towards the centre): Tsin⁡θ=mrω2T\sin\theta=mr\omega^2, which gives T=mlω2T=ml\omega^2 and ω2=glcos⁡θ\omega^2=\frac{g}{l\cos\theta}.

lθOPC
Conical pendulum, l = 1.2 m, θ = 60°: r = l sin θ.
  • VerticalTcos⁡θ=mgT\cos\theta=mg
  • HorizontalTsin⁡θ=mrω2T\sin\theta=mr\omega^2
  • Resultω2=glcos⁡θ\omega^2=\dfrac{g}{l\cos\theta}

Worked example

m=0.5m=0.5 kg, l=1.2l=1.2 m, θ=60∘\theta=60^\circ. Find TT, ω\omega and the period.

A conical pendulum has m=0.2m=0.2 kg, l=0.5l=0.5 m and ω=6\omega=6 rad s−1^{-1}. Find the tension using T=mlω2T=ml\omega^2.

An elastic string

The tension supplies the inward force, and the circle's radius is the stretched length.

If the particle is attached to an elastic string and moves on a smooth horizontal table, the tension is the only horizontal force. Hooke's law gives T=λxlT=\frac{\lambda x}{l}, and the radius of the circle is the stretched length, r=l+xr=l+x.

Then T=mv2r=mrω2T=\frac{mv^2}{r}=mr\omega^2. Because rr depends on ω\omega, a faster particle stretches the string more, so a breaking tension gives a maximum ω\omega.

  • Radiusr=l+xr=l+x
  • TensionT=λxl=mv2rT=\dfrac{\lambda x}{l}=\dfrac{mv^2}{r}

Worked example

m=0.3m=0.3 kg, l=0.8l=0.8 m, λ=24\lambda=24 N, and the circle has radius r=1.0r=1.0 m. Find the speed.

An elastic string has natural length 11 m and λ=20\lambda=20 N. It is stretched by 0.50.5 m while the particle moves in a circle. What is the tension?

Banked surfaces and friction

The horizontal component of the normal reaction provides the inward force: tan⁡θ=v2rg\tan\theta=\frac{v^2}{rg} with no friction.

On a surface banked at angle θ\theta the normal reaction RR is perpendicular to the surface, and its horizontal component Rsin⁡θR\sin\theta supplies the inward force.

With no sideways friction: vertically Rcos⁡θ=mgR\cos\theta=mg and horizontally Rsin⁡θ=mv2rR\sin\theta=\frac{mv^2}{r}, so tan⁡θ=v2rg\tan\theta=\frac{v^2}{rg}. On a flat bend friction alone supplies the force: no slipping needs μ≥v2rg\mu\ge\frac{v^2}{rg}. On a rough bank, at the limit use F=μRF=\mu R, acting down the slope if about to slide up, and up it if about to slide down.

horizontalbank20°ABC
A bank at an angle of 20° to the horizontal.

Worked example

r=40r=40 m and θ=20∘\theta=20^\circ, with no friction. Find the speed, and the reaction on a 9090 kg rider.

A smooth bank is designed for v=14v=14 m s−1^{-1} on a bend of radius 5050 m. Find θ\theta using tan⁡θ=v2rg\tan\theta=\frac{v^2}{rg}.

Try an exam question

A particle of mass 0.40.4 kg is attached to one end of a light inextensible string of length 0.80.8 m. The other end is fixed. The particle moves in a horizontal circle with the string making a constant angle of 30∘30^\circ with the vertical. Find the tension in the string and the angular speed of the particle.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

Find the speed of the particle.

1 mark, marked against the mark scheme

Revision notes