Bearings and scale drawing
Studying this course? Keep your progress in one place.
Key facts
- A bearing is an angle measured clockwise from north, always written with three figures.
- Back bearing: add if the bearing is under , otherwise subtract .
- A scale of : map to real, multiply by ; real to map, divide by (same units first).
- In a scale drawing, draw a north line at each turning point and measure with a protractor and ruler.
- Bearing problems make right-angled triangles: sketch, then use Pythagoras or trigonometry.
Three-figure bearings
Measure clockwise from the north line at the starting point and write three figures.
A bearing is a direction given as an angle measured clockwise from north.
It is always written with three figures, so is written . North is , east , south and west .
To find the bearing of B from A, stand at , face north, then turn clockwise until you face .
Write as a three-figure bearing.
Back bearings
The back bearing differs from the bearing by exactly .
If the bearing of from is , the bearing of from is the back bearing.
The two north lines are parallel, so co-interior angles add to .
- back bearing
- back bearing
Worked example
The bearing of from is . Find the bearing of from .
- 1
, so add .
- 2
.
The bearing of from is . What is the bearing of from ?
Scales and maps
A scale of means 1 unit on the map is of the same unit in real life.
A scale such as means unit on the map is of the same unit in real life. So cm on the map is cm m km.
cm km, so change cm to km by dividing by .
- Map to realmultiply by the scale number, then convert units
- Real to mapconvert to the same units, then divide
Worked example
A distance of cm is measured on a map. Find the real distance. Then find how long the same distance is on a map.
- 1
Map to real: cm.
- 2
Convert: cm m km.
- 3
On a map the real cm is cm.
On a map, how many centimetres show a real distance of km?
Scale drawings
Choose a scale that fits the page, draw north lines and bearings, then measure the unknown.
To make a scale drawing, choose a scale so that the drawing fits the page, for example cm to km.
A drawing is only as accurate as your measuring, usually to the nearest millimetre or degree, so give the answer to a sensible accuracy.
- 1
Choose a scale
so the drawing fits the page
- 2
Draw a north line
at each turning point
- 3
Measure the bearing
clockwise, with a protractor
- 4
Mark the distance
with a ruler, using the scale
- 5
Measure the unknown
a distance or an angle
- 6
Convert back
use the scale to find the real value
A drawing uses 1 cm to 2 km. A line measures 7 cm. What is the real distance?
Bearings with triangles
North, east, south and west are at , so sketch the journey and find the angle inside the right-angled triangle first.
Most bearing problems create a right-angled triangle. Sketch the journey, add north lines, and find the angle inside the triangle first.
In real-life (criterion D) problems, state assumptions such as constant speed and straight paths, and say how they affect how accurate your answer is.
Worked example
A boat sails km east, then km north. Find the distance back to the start, the bearing of the finish from the start and the back bearing.
- 1
Distance back km.
- 2
The angle at the start is north of east.
- 3
Bearing of the finish , so (nearest degree).
- 4
Back bearing .
A hiker walks km east then km north. How far is she from the start?
Try an exam question
A ship sails km on a bearing of from to . Write down the bearing of from , and calculate how far north of the ship is. Give your answer to 3 significant figures.
[3 marks]
- [1]Back bearing .
- [1]North distance .
- [1] km.
That's the notes covered.
Carry on to the next subtopic.
Try a question
What is the bearing of from ?
1 mark, marked against the mark scheme
What is the bearing of from ?
1 mark, marked against the mark scheme