Vectors and resultants

Vectors and resultants

Spec 2.1 · Edexcel International A Level Maths: Revision notes

Studying this course? Keep your progress in one place.

Key facts

  • A vector has magnitude and direction; a scalar has magnitude only. Force, velocity and acceleration are vectors.
  • ∣xi+yj∣=x2+y2|x\mathbf{i}+y\mathbf{j}|=\sqrt{x^2+y^2} and the direction comes from tan⁡θ=yx\tan\theta=\frac yx.
  • The resultant is the sum of the vectors: add the i\mathbf{i} components and the j\mathbf{j} components.
  • Resolve a vector FF at angle θ\theta to i\mathbf{i} as Fcos⁡θ i+Fsin⁡θ jF\cos\theta\,\mathbf{i}+F\sin\theta\,\mathbf{j}.
  • A particle is in equilibrium when the resultant is 0\mathbf{0}.

Vectors, magnitude and direction

Use Pythagoras for the magnitude and tan⁡θ=yx\tan\theta=\dfrac yx for the direction, saying which line the angle is measured from.

A vector has both magnitude and direction. A scalar has magnitude only. In mechanics, force, velocity, acceleration and displacement are vectors.

In component form, a=xi+yj\mathbf{a}=x\mathbf{i}+y\mathbf{j}, where i\mathbf{i} and j\mathbf{j} are perpendicular unit vectors.

The angle θ\theta is measured from the i\mathbf{i} direction.

  • Magnitude∣a∣=x2+y2|\mathbf{a}|=\sqrt{x^2+y^2}
  • Directiontan⁡θ=yx\tan\theta=\dfrac yx
a5331°OAX
a=5i+3j\mathbf{a}=5\mathbf{i}+3\mathbf{j} has magnitude 34≈5.83\sqrt{34}\approx5.83 and makes an angle of 31.0∘31.0^\circ with i\mathbf{i}.

Worked example

Find the magnitude and direction of a=5i+3j\mathbf{a}=5\mathbf{i}+3\mathbf{j}.

What is the magnitude of 3i−4j3\mathbf{i}-4\mathbf{j}?

Adding vectors: the resultant

The resultant is the single vector with the same effect as all the vectors together; add the components.

The resultant is the single vector with the same effect as several vectors acting together.

Add components: (ai+bj)+(ci+dj)=(a+c)i+(b+d)j(a\mathbf{i}+b\mathbf{j})+(c\mathbf{i}+d\mathbf{j})=(a+c)\mathbf{i}+(b+d)\mathbf{j}.

In a vector diagram, place the vectors nose to tail. The resultant joins the start to the finish (the triangle law).

A particle is in equilibrium when the resultant is 0\mathbf{0}, so each component sums to zero.

F1F2ROPQ
Nose to tail: F1\mathbf{F}_1 then F2\mathbf{F}_2. The resultant R\mathbf{R} joins the start to the finish.

Worked example

Find the resultant of F1=7i−3j\mathbf{F}_1=7\mathbf{i}-3\mathbf{j} and F2=−2i+6j\mathbf{F}_2=-2\mathbf{i}+6\mathbf{j}.

Forces 2i+j2\mathbf{i}+\mathbf{j} and −2i−j-2\mathbf{i}-\mathbf{j} act on a particle. What is the resultant?

Resolving a vector into components

A vector of magnitude FF at angle θ\theta to i\mathbf{i} has components Fcos⁡θF\cos\theta along i\mathbf{i} and Fsin⁡θF\sin\theta along j\mathbf{j}.

To resolve a vector of magnitude FF at angle θ\theta to the i\mathbf{i} direction, use trigonometry in a right-angled triangle.

The component along i\mathbf{i} is Fcos⁡θF\cos\theta and along j\mathbf{j} is Fsin⁡θF\sin\theta.

If the angle is measured from the j\mathbf{j} direction, the roles of sine and cosine swap.

24 N24 cos 40°24 sin 40°40°OFX
A force of 24 N at 40∘40^\circ to i\mathbf{i} has components 24cos⁡40∘24\cos40^\circ and 24sin⁡40∘24\sin40^\circ.
  • F\mathbf{F}(Fcos⁡θ)i+(Fsin⁡θ)j(F\cos\theta)\mathbf{i}+(F\sin\theta)\mathbf{j}

Worked example

Resolve a force of 24 N at 40∘40^\circ to the i\mathbf{i} direction.

A force of 10 N makes an angle of 30∘30^\circ with the j\mathbf{j} direction. What is its i\mathbf{i} component?

Vectors from magnitude and direction

Divide a vector in the right direction by its magnitude to get a unit vector, then multiply by the required magnitude.

A vector in the direction of xi+yjx\mathbf{i}+y\mathbf{j} with magnitude MM is M xi+yjx2+y2M\,\dfrac{x\mathbf{i}+y\mathbf{j}}{\sqrt{x^2+y^2}}.

A 3, 4, 5 or 5, 12, 13 triangle gives exact components, so look out for them.

Check that the magnitude of your answer equals MM.

1068OA
A vector of magnitude 10 in the direction 3i + 4j is 10 × (3i + 4j)/5 = 6i + 8j, drawn to scale.
  • Magnitude MM, direction d\mathbf{d}M d∣d∣M\,\dfrac{\mathbf{d}}{|\mathbf{d}|}

Worked example

Find a 26 N force in the direction 5i+12j5\mathbf{i}+12\mathbf{j}.

What is the unit vector in the direction 3i+4j3\mathbf{i}+4\mathbf{j}?

Solving problems with resultants

Write the required resultant, subtract the known forces, then find the magnitude with Pythagoras and the direction with tan⁡θ\tan\theta.

To find an unknown force, write the required resultant, subtract the known vectors and read off the components.

For three forces with resultant 20i20\mathbf{i}, F3=20i−(F1+F2)\mathbf{F}_3=20\mathbf{i}-(\mathbf{F}_1+\mathbf{F}_2).

Then find its magnitude and direction, saying clearly which line the angle is measured from.

Keep exact values, or at least 4 significant figures, until the end, and round to 3 s.f.

F318.4°OPX
F3=18i−6j\mathbf{F}_3=18\mathbf{i}-6\mathbf{j} acts at 18.4∘18.4^\circ below the direction of i\mathbf{i}.

Worked example

Forces F1=3i+2j\mathbf{F}_1=3\mathbf{i}+2\mathbf{j} and F2=−i+4j\mathbf{F}_2=-\mathbf{i}+4\mathbf{j} act with F3\mathbf{F}_3 so that the resultant is 20i20\mathbf{i}. Find F3\mathbf{F}_3 and its direction.

Forces F1\mathbf{F}_1 and F2\mathbf{F}_2 have resultant R\mathbf{R}. How do you find a third force F3\mathbf{F}_3 that makes the resultant 0\mathbf{0}?

Try an exam question

A particle is acted on by two forces F1=(3i−2j)\mathbf{F}_1=(3\mathbf{i}-2\mathbf{j}) N and F2=(−7i+5j)\mathbf{F}_2=(-7\mathbf{i}+5\mathbf{j}) N. Find the resultant R\mathbf{R}, its magnitude, and the angle it makes with the direction of −i-\mathbf{i}.

[4 marks]

That's the notes covered.

Carry on to the next subtopic.

Try a question

Find the resultant of F1\mathbf{F}_1 and F2\mathbf{F}_2.

1 mark, marked against the mark scheme

Revision notes